Shop By Vehicle
Suspension
-
Camburg Ford Raptor 17-18 FOX Ultimate Performance System
- 0-2″ lift front | 1″ lift rear
- The ultimate stock width suspension kit
- Easy bolt-on design
$12,202.89 -
Camburg Ford Raptor 17-20 Performance Long Travel Kit
- Boxed Lower Arms w/ Skid Plates
- Billet Upper Uniball Arms
- Increased Wheel Travel
$5,295.00 – $9,294.95 -
-
Camburg Toyota Landcruiser 300 Series 2022 Trail Series Long Travel Kit
- Boxed Lower Uniball Arms
- Billet Upper Uniball Arms
- Slapper Bump Stop System
$6,595.99 – $7,870.99 -
Camburg Ford Bronco 21-22 FOX Ultimate Performance System
- Corrected geometry with upper arms
- 20% increased wheel travel
- Rear coilover conversion
- Improved handling on & off-road
$6,395.88 – $8,095.88 -
Camburg Ford Bronco 21-22 FOX 2.5 Performance Elite DSC Kit
- Corrected geometry with upper arms
- 20% increased wheel travel
- Rear coilover conversion
- Improved handling on & off-road
$5,699.89 – $6,399.89 -
Camburg Ford Bronco 21-22 King 2.5 Performance Kit
- 0-2″ lift (front) & 0-1.5″ lift (rear)
- Corrected geometry with upper arms
- Rear coilover conversion
- Improved handling on & off-road
$5,240.99 – $7,636.98 -
Camburg Ford F-250/350 4wd 05-16 King Coilover Performance Kits
- 2-2.5″ Lift
- Improved Ride
- Increased Wheel Travel
$5,275.99 – $5,795.99 -
Camburg Ford F-250/350 4wd 17-22 King Coilover Performance Kits
- 2.5″ lift 17-19 | 3.5″ 20-22
- Improved ride quality
- Increased wheel travel
$5,690.99 – $6,210.99 -
Camburg Ford F-250/350 4wd 05-22 Uniball Radius Arm Kit
- Corrects caster for improved handling
- Increased ground clearance
- Uniball frame pivots
- For 2-3.5″ of lift
$1,699.99
-
Camburg Toyota Tacoma Pre/4wd 05-15 Race Series Long Travel Kit
$3,895.00 – $7,414.00 -
Camburg Toyota 4-Runner 03-09 | FJ 07-09 Race Series Long Travel Kit
$3,895.00 – $7,414.00 -
-
Camburg Ford Ranger XLT 2wd 98-12 Long Travel Kit
$5,295.00 – $9,970.00 -
Camburg Ford Ranger Edge 2wd 01-12 Long Travel Kit
$5,295.00 – $9,970.00 -
Camburg Ford Ranger Edge 2wd 01-12 Race Long Travel Kit
$7,295.00 – $11,970.00 -
Camburg Toyota Tundra 2wd/4wd 00-03 Long Travel Kit
$3,295.00 – $6,565.00 -
Camburg Toyota Tundra 2wd/4wd 07-21 Race Series Long Travel Kit
$3,995.00 – $7,740.00
-
-
Toyota Tundra 2wd/4wd 07-21 Rear Shocks
$288.00 – $359.90 -
Ford Ranger 2wd/4wd ’83-12 Rear Shocks
$288.00 – $359.90 -
Ford F-150 2wd 04-08 Rear Shocks
$288.00 – $359.90
-
Deaver Rear Leaf Spring Kits
- Improved ride on and off-road
- Progressive spring rate
- Increased bottoming resistance
$345.00 – $1,200.00 -
Camburg Leaf Spring Axle Perches
These leaf spring axle perches are CNC laser cut and formed to fit 3″ OD or 3.5″ OD axle tubing. We also have a version specific for 2007-2014 Toyota Tundras since the leaf springs are angled on the axle housing. They are 2.5″ wide and 6″ long for reduced axle wrap. The centering pin hole is 9/16″. These are a perfect compliment to our Camburg rear end housing or for spring-under conversions.
- Sold in pairs
$40.00 – $50.00 -
Camburg Toyota Tundra 2wd/4wd 07-21 Long Travel Spring-Under Kit
- Deaver I96 Leaf Springs w/ u-bolts, bushings & sleeves
- Camburg L/T Shackles
- Camburg Axle Spring Perches
- Camburg U-bolt Spring Plates
$1,635.00 -
Eibach 4″ x 3.0″ ID Coil Springs
Eibach’s ERO coilover springs are designed to withstand the extreme challenges of off-road racing with legendary Eibach performance, quality and reliability. Like all other Eibach racing springs, the ERO springs will maintain their dimensions and rates to incredibly tight tolerances, jump after jump, race after race.
- Ultra-lightweight for reduced un-sprung Mass
- Maximum travel in combination with smallest block heights
- Exceptional block resistance and durability
- Precision tolerances
- Precision plan-parallel and square end configurations under unloaded/loaded conditions to +/- 1 degree
- Lowest side loads with load center ideally located relative to spring axis
- Highest linearity and guaranteed rate consistency within 2% Of advertised rate
- Each spring individually tested and rated
$100.00
-
Camburg Toyota Tundra 2wd/4wd 07-21 KINETIK Billet Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.50″ FK uniballs w/ billet caps
- 6061 billet aluminum construction
$1,599.99 -
Camburg Ford Raptor 17-22 KINETIK Billet Uniball Upper Control Arms
- CNC machined from aircraft quality 6061 aluminum
- FK 7/8″ heim joints
- FK 1.25″ uniballs
- Corrected caster & camber geometry
$1,499.99 -
Camburg Ford F-150 2wd/4wd 04-20 KINETIK Billet Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.25″ FK uniballs w/ billet caps
- 6061 billet aluminum construction
$1,499.99 -
Camburg Chevy/GMC 1500 2wd/4wd 19-22 KINETIK Billet Uniball Upper Control Arms
- CNC machined from aircraft quality 6061 aluminum
- FK 7/8″ heim joints
- FK 1.25″ uniballs
- Corrected caster & camber for lifted trucks
$1,599.99 -
Camburg Ford Ranger 2wd/4wd 19-22 KINETIK Billet Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.25″ FK uniballs w/ billet caps
- 6061 billet aluminum construction
$1,499.99 -
Camburg Toyota Landcruiser 200 Series 08-21 KINETIK Billet Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.25″ FK uniballs w/ billet caps
- 6061 billet aluminum construction
$1,659.99 -
Camburg Ford F-150 2wd/4wd 21-22 KINETIK Billet Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.25″ FK uniballs w/ billet caps
- 6061 billet aluminum construction
$1,599.99 -
Camburg Ford Bronco 21-22 KINETIK Billet Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.25″ FK uniballs w/ billet caps
- 6061 billet aluminum construction
$1,599.99
-
Camburg “Icon” T-shirt
$29.95 -
Camburg “Circa 97” T-shirt
$24.95$19.95 -
Camburg “Warbird” T-shirt
$29.95 -
Camburg “KINETIK Built” T-shirt
$24.95$19.95 -
Camburg “ECo506” T-shirt
$29.95
-
Camburg 8.5″ Sticker Pack (6)
Our Camburg sticker is 8.5″ wide by 2.4″ tall and has a UV clear lamination to keep it looking fresh under harsh conditions. We include 6 of these, enough to tag your truck, tool box, fridge and everything else in sight. Price includes shipping!
$5.00 -
Camburg Icon 4.25″ Sticker Pack (6)
Our Camburg Icon sticker is 4.25″ wide by 1.87″ tall and has a UV clear lamination to keep it looking fresh under harsh conditions. We include 6 of these, enough to tag your truck, tool box, fridge and everything else in sight. Price includes shipping!
$5.00 -
Camburg 16″ Sticker Pack (2)
Show your support with two of our 16″ x 4.5″ Camburg stickers that has a UV clear lamination to keep it looking fresh under harsh conditions. These are also the stickers required for race contingency sponsorship in BITD, SCORE, SNORE and MORE racing series.
$5.00 -
Camburg Warbird 4″ Sticker Pack (6)
Our Warbird sticker is 4″ in diameter and has a matte UV clear lamination to keep it looking fresh under harsh conditions. We did these in a few different colors so you can order 6 of your favorite color or an assorted 6 pack that has 2 of each color. Enough to tag your truck, tool box, fridge and everything else in sight. Price includes shipping!
$5.00
Fabrication
-
Camburg 4130 Billet Tube Clamps
Our billet tube clamps have been copied and knocked off for 15+ years. We machine ours from aircraft quality 4130 chromoly, not cheap mild steel. Our design is lighter and stronger compared to others and we offer a wider range of sizes and styles. These work great for tubes and structures that need to be easily removed. Don’t be fooled by cheap & inferior imitations.
$26.50 – $40.00
-
Camburg Fender Washers
- 1.25″ OD 6061 aluminum
- Available black, gold, red, King blue and raw (silver)
- Setup for 1/4″ flat-head screw/bolt
- Made in the USA
$3.00 -
Camburg Fender Washer Kit (10pk)
- 1.25″ OD 6061 washer
- Available black, gold, red, King blue and raw (silver)
- Includes screws, tabs and nut plates
- Made in the USA
$55.00 -
Camburg Fender Washers (10pk)
- 1.25″ OD 6061 aluminum
- Quantity 10 washers
- Available black, gold, red, King blue and raw (silver)
- Setup for 1/4″ flat-head screw/bolt
- Made in the USA
$30.00
-
Camburg 2.25 Prerunner Series Front Hub Kit
- 2.25″ ID Timken wheel bearings
- Billet aluminum hubs
- 5 on 5.5″ or 6 on 5.5″ bolt patterns
- 5/8″ wheel studs
- Made in-house in the USA
$1,550.00 -
Camburg Ford F-150 2wd/4wd 04-08 1.25 Performance Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.25″ FK uniballs
$849.99 -
Camburg 4130 Billet Tube Clamps
Our billet tube clamps have been copied and knocked off for 15+ years. We machine ours from aircraft quality 4130 chromoly, not cheap mild steel. Our design is lighter and stronger compared to others and we offer a wider range of sizes and styles. These work great for tubes and structures that need to be easily removed. Don’t be fooled by cheap & inferior imitations.
$26.50 – $40.00 -
Camburg Toyota Tundra 2wd/4wd 00-06 1.00 Performance Uniball Upper Control Arms
- Increases usable wheel travel
- Corrects camber and caster
- Eliminates weak factory ball-joints
- 1.00″ FK uniballs
$749.99