Our Performance 2.5 kit for the 11-19 Chevy/GMC 2500 HD’s takes our leveling kit to the next level. We utilize the same Camburg 1.25″ uniball upper arms but combine them with KING’s 2.5 series front and rear shocks with compression adjusters.
Our Performance 2.0 kit for the 11-19 Chevy/GMC 2500 HD’s takes our leveling kit to the next level. We utilize the same Camburg 1.25″ uniball upper arms but combine them with FOX’s 2.0 Performance Series front and rear shocks.
We replace the factory upper control arms and small weak ball-joints with a pair of 4130 chromoly custom tubular A-arms using 1.25″ uniballs to achieve maximum angles that result in more wheel travel over stock. Our arms are built from thick .188w” tubing unlike the competition. These arms also include urethane bushings and all hardware needed to install them. Also included in this new performance system is a pair of Bilstein 5100 Series shocks for the front and rear of the truck.
For the Chevy/GMC 2500 HD’s, KING offers their 2.5 series front shocks in a remote reservoir configuration with an optional external compression adjuster for fine tuning. These bolt right in and include the necessary hardware. These are for 0-2.5″ of lift over stock in the front.
For the Chevy/GMC 2500 HD’s, KING offers their 2.5 series rear shocks in a piggyback reservoir configuration with an optional external compression adjuster for fine tuning. These bolt right in and include the necessary hardware. These are for 0-1.5″ of lift over stock in the rear.
Our Camburg limit straps are made in the USA and quad wrapped for the ultimate strength from military grade materials. The mounting tabs are 4130 chromoly and plated black for corrosion resistance. These won’t stretch like cheaper versions will that are made overseas.
With heims and uniballs you want to make sure you use the right lube and not a grease or oil that attracts dirt. Tri-flow is a teflon (PTFE) based lube that goes on wet and drys to a film to coat and seal the surfaces. You only need to use 3-4 drops per uniball or heim.
Our UCA bushing and sleeve kit includes replacement bushings and pivot sleeves for all Camburg bushing upper arms. We also include new zerk fittings along with bushing grease packets. Here’s an easy way to freshen up your upper arms.
Looking to replace some of the individual parts for your Camburg upper arms? Here are some of the small parts used on our kits. We also offer a complete hardware kit, a bushing and sleeve kit and uniball kits separately.
An easy way to mount a limit strap to the frame/chassis is using this clevis. It gives you the ability to adjust the strap length so initial setup is not as critical and you can re-adjust if the strap stretches over time or if you miscalculated the location slightly. You will need to make the mount this fits into from a piece of tubing.
Camburg Engineering is the leader in off-road suspension systems and is at the forefront in technology and design. Our over the counter parts are being race tested constantly and have won numerous championships, so if you are looking for the most proven long travel or performance suspension systems Camburg is your #1 choice.