Show all 37 Result

  • FOX Ford Raptor 4wd 10-14 Performance 3.0 Kit

    $5,695.00 CAM-110097
    Quick Overview

    At FOX, racing has always been the cornerstone of their  product development. Their 3.0 Factory Series Coil-over Internal Bypass, position-sensitive shocks maximize the entire wheel travel, increases oil capacity, and adds 60% more damping area over the stock FOX SVT shocks. In the rear FOX went all out on the SVT Raptor fitting its huge FACTORY Series 3.0 Bypass shocks that are also found on Brian Deegans & Bryce Menzies championship winning short course trucks. Our upper arms are made with US 4130 chromoly tubing, heat treated stainless steel hardware, and US made FK 1.50″ uni-balls. Main improvements are 7/8″ heim pivots for more adjustment, less flex, and a more precision cycle of travel.

    At FOX, racing has always been ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance 1.50 Uniball Heim Upper Arms

    $999.00 CAM-110079
    Quick Overview

    Here are our Camburg 1.50 uniball upper arms for the Ford SVT Raptor. These arms are made with US 4130 chromoly tubing, heat treated stainless steel hardware, and US made FK 1.50″ uni-balls. Main improvements are 7/8″ heim pivots for more adjustment, less flex, and a more precision cycle of travel. The strength of these upper arms are far superior to the factory units because of the much larger tube size and the huge 1.50″ uni-ball which is the same version as on our Trophy Truck. These upper arms will also allow more wheel travel when combined with other aftermarket shocks.

    Here are our Camburg 1.50 uniball ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance 1.25 Uniball Upper Arms

    $699.00 CAM-110109
    Quick Overview

    We now have available for the Ford Raptors our 1.25″ uniball upper arms that use polyurethane bushing versus heims like on our 1.50″ uniball versions. This keeps the cost down with less maintenance. Also by using a smaller uniball you’re able to use the factory offset wheels and tires.

    We now have available for the ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance Lower Arm Kit

    $1,895.00 CAM-110098
    Quick Overview

    This arm replaces the stock length lower and gives you the ability to add a hydraulic/air bump-stop and also run limit straps. CAD designed, this arm is considerably stronger than the cast aluminum stock arm, has internal gusseting and pivots on FK 1″ PTFE lined uniballs at the frame rather than the cheap rubber bushings that constantly bind and flex under braking. We use a FK PTFE lined 1.50″ uniball at the spindle for maximum strength and articulation rather than the factory ball-joint. No modification to the spindle is necessary as we use machined heat-treated stainless steel mis-alignment spacers that adapt the uniball to the tapered ball-joint spindle hole. It also has a provision to use the factory sway-bar with our optional sway-bar link kit.

    This arm replaces the stock length ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance Dual Shock Lower Arm Kit

    $2,195.00 CAM-110111
    Quick Overview

    This arm replaces the stock length lower and gives you the ability to  run a secondary bypass shock for increased dampening and also add a hydraulic/air bump-stop. We developed in-house a FOX 3.0 bypass shock to be used with these lower arms that are valved specifically for the Raptor with a custom bypass tube layout and configuration. When designing this arm we set it up for maximum useable wheel travel along with the correct shock motion ratio geometry, we made no compromises.

    This arm replaces the stock length ...

  • Categories : Suspension, Spindles

    Camburg Ford SVT Raptor 10-14 Performance Spindle Kit

    $2,195.00 CAM-110126
    Quick Overview

    We’ve spent some long days and nights designing and testing our Camburg Raptor performance spindles. CAD designed with stress analyzing we’ve come up with a product that surpasses the factory part not only in strength, but in quality and attention to detail. It’s the detail work that sets our product apart from others. We use the highest quality materials and manufacturing techniques when building these. We water-jet cut the thick plates, MIG weld them, then CNC machine them in-house to 0.001” tolerances after welding for precision fitment of the hubs and driveline assembly. We then MIG and TIG weld the remaining 4130 chromoly gussets, plates and machined components and powercoat them in our trademark Camburg steel gray. We include stronger and longer bolts for the brake calipers and hub assembly as we increase the thickness in those areas for added strength.

    We've spent some long days and ...

  • FOX Raptor 4wd 10-14 3.0 Internal Bypass Coilovers

    $2,699.95$2,999.95 See Below
    Quick Overview

    At FOX, racing has always been the cornerstone of their  product development. Their 3.0 Factory Series Coil-over Internal Bypass, position-sensitive shocks maximize the entire wheel travel, increases oil capacity, and adds 60% more damping area over the stock FOX SVT shocks. They allow for a plush predictable ride over normal offroad driving conditions and also have the ability to ramp up damping force for extreme use. These heavy-duty, steel-bodied shocks are loaded with anodized billet aluminum components and race-bred internal valving. They are designed to bolt right on to your factory mounts. The integrated coil spring can be adjusted for preload and ride height and come pre-set to level your vehicle right out of the box.

    At FOX, racing has always been ...

  • King Ford Raptor 4wd 10-14 3.0 Remote Front Coilovers

    $2,600.00 30001-401
    Quick Overview

    For the 10-14 Ford Raptors, KING offers their 3.0 series coilovers in a remote reservoir configuration with their external compression adjuster for fine tuning. These bolt right in and include the necessary brackets to mount the reservoirs to the frame.

    For the 10-14 Ford Raptors, KING ...

  • Camburg/FOX Raptor Performance 3.0 Front Bypass Shocks (pair)

    $2,400.00 CAM-110119
    Quick Overview

    We worked with FOX extensively to develop a 3.0 bypass shock to work with their 3.0 internal bypass coilovers in our Performance Series lower arms. With the specific bypass tube layout, piston design and valving we came up with a setup that works very well both on and off-road. These shocks can also be upgraded to use FOX’s new QAB Quick Adjusters.

    We worked with FOX extensively to ...

  • Camburg Ford Raptor 10-14 Performance Bypass Mount Kit

    $450.00 CAM-110112
    Quick Overview

    We now have available the bypass mount that matches up to our dual shock performance lower arms. These weld onto the frame and locate off the top of the coil bucket. We powdercoated these matte black minus the areas that get welded. Those spots get touched up after installation.

    We designed this around a specific FOX 3.0 bypass shock and ICON has also developed a bypass shock to work in conjunction with our kit.

    We now have available the bypass ...

  • Categories : Suspension, Shocks

    Camburg Ford Raptor 10-14 Performance Retro-fit Weld-on Lower Bypass Shock Mounts

    $195.00 CAM-110118
    Quick Overview

    If you already have our single shock Raptor Performance lower arms you can weld these pre-made mounts to your existing lower arms to add a bypass shock. No need selling your current arms and buying our dual shock version. Once welded on and re-powder-coated, you would never know the difference.

    If you already have our single ...

  • FOX Raptor 4wd 10-14 3.0 Bypass Rear Shocks

    $2,200.00 FOX-883-02-047
    Quick Overview

    In the rear FOX went all out on the SVT Raptor fitting its huge FACTORY Series 3.0 Bypass shocks that are also found on Brian Deegans & Bryce Menzies championship winning short course trucks. These External Bypass shocks were developed with three independently owner tunable bypass zones for complete ride control regardless of terrain conditions. Married with 2.5 inch diameter Piggyback reservoirs, lined spherical bearings, proprietary racing oil and Viton seals for unimagined performance and longevity. Pair these shocks with aftermarket leaf springs and bump stop kits to unleash the SVT Raptors true offroad capabilities.

    In the rear FOX went all ...

  • KING Ford Raptor 10-14 4wd 3.0 Rear Bypass Shocks

    $2,300.00 30001-402
    Quick Overview

    For the Ford Raptor’s, KING offers their 3.0 series rear bypass shocks in a piggyback reservoir configuration. These bolt right in and include the necessary hardware. These are for 0-1.5″ of lift over stock in the rear.

    • 3.0″ ID honed CAD plated cylinders
    • 7/8″ hard chrome micro polished shafts
    • PTFE lined rod ends
    • Fully rebuidable and revavlable
    • Made in the USA
    For the Ford Raptor's, KING offers ...

  • Camburg Ford Raptor 10-14 LCA Sway-bar End Link Kit

    $449.00 CAM-110114
    Quick Overview

    Normally we remove the factory sway-bar with our performance lower arms to allow the suspension to be truly independent. For instances where the customer wants to keep the sway-bar, we now have an end link kit that works with our lower arms and with optional spacers can be used with the stock lower arms to replace the weaker factory version.

    Normally we remove the factory sway-bar ...

  • Categories : Suspension, Shackles

    Camburg Ford Raptor 10-14 | F-150 09-15 Rear TIG 4130 Shackles

    $250.00 CAM-120018
    Quick Overview

    Looking for the best? Our Camburg TIG shackles replace the stock light-duty version your Ford Raptor/F-150 is equipped with from the factory. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle.

    Our TIG shackles are a fabricated boxed gusseted design from 4130 chromoly  that is much stronger and use polyurethane bushings that pivot smoother with less flex. We TIG weld them, bead blast the surfaces then electroless nickel plate them and have them stress relieved afterwards.

    Looking for the best? Our Camburg ...

  • Camburg Ford Raptor 10-14 | F-150 09-15 Rear MIG Shackles

    $160.00 CAM-120017
    Quick Overview

    Our Camburg MIG shackles replace the stock light-duty version your Ford Raptor/F-150 is equipped with from the factory. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle.

    Our shackles are a fabricated boxed gusseted design that is much stronger and use polyurethane bushings that pivot smoother with less flex. They are MIG welded and powder-coated in our matte black finish and ready to be bolted on using the factory hardware.

    Our Camburg MIG shackles replace the ...

  • Categories : Suspension, Shackles

    Camburg Ford Bronco 80-96 / F-150 04-14 / Raptor 1.5 MIG Shackles

    $160.00 CAM-120005
    Quick Overview

    Our extended shackle is designed around using Deaver leaf springs. These are longer length  than the stock shackles and allow for maximum wheel travel. The stock shackles are too short and limit droop. These are 1.5″ longer than stock. Since the shackles are longer, they will lower the ride height compared to the stock shackles. These fit the OEM 3″ wide leaf springs.

    Our extended shackle is designed around ...

  • Deaver Leaf Springs

    $280.00$1,325.00 *See Below
    Quick Overview

    Looking to lift the rear of your truck? We use the best leafs springs out there manufactured in the USA by Deaver Spring who’s been in the business for over 100 years. They are progressive for better bottoming control when off-roading but plush when driven on the street for a much better ride compared to stock both on and off-road. Some models have a mini-pak available at a lower cost that replaces the factory over-load spring with a 3-5 leaf pack for added lift and progression. Most Deaver springs are not designed for heavy hauling and heavy towing.

    Looking to lift the rear of ...

  • Camburg M14 x 2.00 6-Lug Spline Wheel Lug Kit (Black)

    $45.00 CAM-010041
    Quick Overview

    Camburg M14 x 2.00 6-Lug Spline Wheel Lug Kit (Black)

    These lugs are made for aftermarket wheels and come in a complete set with a spline key, to prevent theft.

    F-150 & RAPTOR

    04-16

    Camburg M14 x 2.00 6-Lug Spline ...

  • Camburg Rear Shackle Bushing & Sleeve Kit

    $25.00 See Below
    Quick Overview

    Looking to freshen up the bushings on your Camburg rear shackles. This kit replaces all the bushings, pivot sleeves and we include our bushing grease packets.

    Select your truck below ……

    Looking to freshen up the bushings ...

  • Camburg Steering Heim Clevis Kits

    $199.00 See below
    Quick Overview

    Looking to adapt a heim to your factory steering rack? Our steering clevis’s and clevis bolts are CNC machined from heat-treated 17-4 H1150 stainless steel for maximum strength. Our design has the least amount of bumpsteer due to our design compared to other aftermarket versions. We supply stainless heim spacers to be used with a standard 3/4″ x 3/4″ heim joint (JMX-12T).

    Looking to adapt a heim to ...

  • Categories : Suspension, Limit Straps

    Camburg Limit Straps

    $25.00 See Below_
    Quick Overview

    Our Camburg limit straps are made in the USA and quad wrapped for the ultimate strength from military grade materials. The mounting tabs are 4130 chromoly and plated black for corrosion resistance.

    • These are sold individually not as a pair.
    Our Camburg limit straps are made ...

  • Categories : Suspension, Limit Straps

    Limit Strap Clevis

    $25.00 SS-18901
    Quick Overview

    An easy way to mount a limit strap to the frame/chassis is using this clevis. It gives you the ability to adjust the strap length so initial  setup is not as critical and you can re-adjust when the strap stretches over time so that you’re not allowing the suspension to droop out too far. You will need to make the mount this fits into.

    • Sold individually
    An easy way to mount a ...

  • Categories : Accessories, Fiberglass

    Glassworks Ford Raptor 10-14 Front Fiberglass Fenders

    $499.00 GU-127
    Quick Overview

    These fenders have a wider opening than stock, and back by the door area where it is common for tire rubbing, these fenders are 2″ flared out and we pushed them back by 2″ to allow for a larger tire with no rubbing issues. Allows for a larger tire with out cutting the factory fenders. Direct bolt on application. Easy to install. Factory look retained. And the items are all “Hand Laid” to ensure quality workmanship and prevent warping, and are all made here in the USA.

    These fenders have a wider opening ...

  • Replacement Upper Arm Uniball Kit

    $101.00$127.00 *See Below
    Quick Overview

    Our uniball kit is what’s required to rebuild the uniballs in your Camburg upper arms. The kit includes two FK Made in the USA PTFE-lined uniballs and two snap rings. Select your model for pricing and uniball size. If you have an older version arm that uses a smaller uniball, make note of it in the order details.

    96-04 Tacoma – 1 in Uniball
    05-16 Tacoma – 1.25 in Uniball (old arms 1 in Uniball)
    00-06 Tundra – 1 in Uniball
    07-16 Tundra – 1.50 in Uniball (old arms 1 in Uniball)
    FJ Cruiser- 1.25 in Uniball (old arms 1 in Uniball)
    04-16 F-150- 1.25 in Uniball (old arms 1 in Uniball)
    Raptor – 1.50 in Uniball (bushing arms 1.25 in Uniball)
    07-16 Silverado – 1.25 in Uniball (99-06 Silverado – 1 in Uniball)
    01-16 2500/3500 HD – 1.25 in Uniball
    03-15 Titan – 1 in Uniball

    Our uniball kit is what's required ...

  • Camburg UCA Bushing and Sleeve Kit

    $60.00 See below
    Quick Overview

    Replacement bushings and sleeves for all Camburg bushing upper arms.

    Replacement bushings and sleeves for all ...

  • Ford Raptor 10-14 Upper Arm Replacement Parts

    $4.00$50.00
    Quick Overview

    Looking to replace some of the individual parts for your Camburg upper arms? Here are some of the small parts used on our kits. We also offer a complete hardware kit, a bushing and sleeve kit and uniball kits separately.

    Looking to replace some of the ...

  • Camburg Super Bushing Grease 14 oz. Tube

    $40.00 CAM-010028
    Quick Overview

    We now have available the same polyurethane grease we supply with our upper arms in a grease tube to load into a grease gun and charge through zerk fittings. This is the BEST grease to use for any polyurethane bushings from upper arms to leaf springs. It contains versatile water-proof, non-melting Teflon and is formulated to seal out water and to lubricate under the most adverse conditions. It’s superior adhesive and extreme pressure qualities, combined with it’s urethane compatibility makes it the only one to use.

    We now have available the same ...

  • Tri-Flow Heim & Uniball Lube

    $6.00 TRIFLOW2OZ
    Quick Overview

    With heims and uniballs you want to make sure you use the right lube and not a grease that attracts dirt. Tri-Flow Superior Lubricant is a superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. The drip bottle application, with a convenient straw, allows for deep penetration in hard to reach moving parts.

    With heims and uniballs you want ...

  • Categories : Performance, Exhaust

    saleMagnaflow Stainless Cat-Back System 10-14 Raptor

    $961.17$1,210.15 $742.72$935.12
    Quick Overview

    Features and Benefits: Lifetime warranty. Dyno tested and proven to make power, performance gains in horsepower and torque, great sound – has a smooth; deep tone, easy to install, mandrel-bent. All welded. Built to last.

    Features and Benefits: Lifetime warranty. Dyno tested ...

  • Switch-Pros SP-8100 Switch Panel Kit

    $499.00 SP-8100
    Quick Overview

    We now have available Switch-Pros new 8 switch power distribution system. This simplifies the wiring process and uses the latest technology eliminating fuses, relays and circuit breakers with their 100A solid state computer. On the remote switch panel, each switch is fully programmable and with Bluetooth technology can be controlled and programmed remotely with your phone or ipad.  We used this same module on our Camburg Trail Edition Tundra to control the KC HiLites and ARB cooler.

    • Eight user-programmable switches
    • User-selectable switch legends
    • Illuminated switches with user-adjustable brightness
    • Programming and control via panel or smart phone
    • Bluetooth interface
    • 100A solid state power module, engine compartment rated
    • Automatic shutdown for overcurrent and low voltage
      Programming options are: On/Off or Momentary, Ign. or Batt., Flash and Strobe functions, Low Voltage Disconnect, and Switch Memory
    • Plug and play installation

    Switch Panel Specs:

    • 4
    We now have available Switch-Pros new ...

  • Switch-Pros SP-8100 Switch Panel Kit (Concealed)

    $499.00 SP-8100-2
    Quick Overview

    We now have available Switch-Pros new 8 switch power distribution system. This simplifies the wiring process and uses the latest technology eliminating fuses, relays and circuit breakers with their 100A solid state computer. On the remote switch panel, each switch is fully programmable and with Bluetooth technology can be controlled and programmed remotely with your phone or ipad.  We used this same module on our Camburg Trail Edition Tundra to control the KC HiLites and ARB cooler.

    • Eight user-programmable switches
    • User-selectable switch legends
    • Illuminated switches with user-adjustable brightness
    • Programming and control via panel or smart phone
    • Bluetooth interface
    • 100A solid state power module, engine compartment rated
    • Automatic shutdown for overcurrent and low voltage
      Programming options are: On/Off or Momentary, Ign. or Batt., Flash and Strobe functions, Low Voltage Disconnect, and Switch Memory
    • Plug and play installation

    Switch Panel Specs:

    • 4
    We now have available Switch-Pros new ...

  • MAXTRAX MKII

    $299.99 MTX02
    Quick Overview

    Perfect for maintaining an inconspicuous profile, black MAXTRAX are nearly invisible when mounted to your vehicle’s roof rack. This is the choice of colour for those in stealth mode. Just make sure to use your included leashes when they’re buried in the mud at night.

    The SAFE, SIMPLE, QUICK and EASY vehicle recovery device. The carton includes 2 MAXTRAX and 2 orange telltale leashes (so you can find your MAXTRAX when they’re buried).

    Perfect for maintaining an inconspicuous profile, ...

  • MAXTRAX Mounting Pin Set

    $29.99 MTXMPS
    Quick Overview

    High-quality black nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack or bars. They have provisions for a small (TSA-style) padlock to keep honest people honest.

    High-quality black nylon and stainless steel ...

  • MAXTRAX Fixing & Linking Kit

    $24.99 MTXFLK
    Quick Overview

    For linking MAXTRAX together to make a continuous track or pegging MAXTRAX to a slippery surface to provide maximum traction.

    For linking MAXTRAX together to make ...

  • MAXTRAX Rear Wheel Harness

    $94.99 MTXRWH
    Quick Overview

    The quickest way to attach MAXTRAX to your vehicle that’s equipped with a rear mounted spare tire. Perfect for the Jeep Wrangler and other vehicles that come from the factory with a tire on the back door.

    The quickest way to attach MAXTRAX ...

  • MAXTRAX Telltale Leashes

    $7.99 MTXFL
    Quick Overview

    MAXTRAX Telltale Leashes make it a breeze to find and recover your MAXTRAX when they’re buried in the ground.

    Please note that MAXTRAX come with leashes, purchase these if you’ve lost yours or need an extra pair.

    MAXTRAX Telltale Leashes make it a ...

Show all 37 Result

Top