With heims and uniballs you want to make sure you use the right lube and not a grease or oil that attracts dirt. Tri-flow is a teflon (PTFE) based lube that goes on wet and drys to a film to coat and seal the surfaces. This minimizes stiction and corrosion in extreme conditions. You only need to use 3-4 drops per uniball or heim.
We recommend using a microfiber towel to wipe clean the surfaces prior to applying. You can also use WD40 to help clean prior but wait 1-2 days before applying Tri-flow to allow the solvents in the WD40 to fully evaporate.
Tri-Flow Superior Lubricant is a superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. The drip bottle application, with a convenient straw, allows for deep penetration in hard to reach moving parts.
High-grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475°F) and humidity. Formulated solvents soften and remove dirt and contaminants, while special additives displace moisture and prevent rust and corrosion. Formulated with P.T.F.E.