Camburg Ford Ranger 2wd/4wd 98-12 Heim Steering Kit

Code: CAM-130003
  • Replaces the weak inner ball-joint and tie-rod
  • Machined from 17-4 H1150 stainless steel
  • FK 3/4″ JMX Heims
  • Made in the USA


In Stock


The stock inner tie-rod ball-joint joint on the 1998-2012 Rangers is known for failing under off-road conditions, so we came up with a solution for this problem. The steering clevis is CNC machined from heat-treated 17-4 H1150 stainless steel along with the custom bolt that attaches it to the factory steering rack. We us a FK 3/4″ JMX series heim with a pair of stainless spacers. We also machine the tie rod that goes from the heim to the factory outer tie-rod from 17-4 H1150 stainless for optimum strength.

This steering upgrade is mandatory for Rangers if you drive your truck off-road. These bolt right up and solves the problem with the stock steering parts.

Fits both coil spring and torsion bar trucks.

  • Steering clevis’s
  • Steering clevis bolts
  • Heim spacers
  • FK JMXL-12T heims
  • 3/4″ LHT jam nuts
  • Tie rods
  • Grade 8 Hardware
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs