JKS Jeep Wrangler JK 07-21 3.5″ J-Konnect Suspension Kit

Code: N/A

$2,062.00

In Stock
Clear

Description

For serious off-road use, step up to a JKS J-Konnect 3.5″ suspension system for your Wrangler JK. J-Konnect™ can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip kit and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX Adventure Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect™ is ready for aggressive trail performance. Get connected with J-Konnect.

  • 2012-2018 Models with 3.6L Pentastar motor will require exhaust modification for driveshaft clearance at full suspension droop, use JKS8150 exhaust extensions.

We also recommend upgrading to stainless steel-braided extended length brake lines with this kit.


CAProp65

  • Front+Rear Dual Rate Coil Springs designed to great ride and improved performance across any terrain.
  • Front+Rear FOX 2.0 Adventure Series IFP shocks specifically valved for this suspension system for improved performance on and off-road.
  • Front Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle.
  • Front Sway Bar Quicker Disconnects and Brake Line Brackets to allow for increased offroad articulation.
  • Front+Rear J-Link Lower Control Arms for improved strength and caster correction.
  • Front+Rear Track Bar Support Braces to improve strength and protection.
  • HD Drag Link Flip Kit w/ Track Bar Bracket to improve steering angles for better handling.
  • Front+Rear Bump Stop Extensions to properly limit suspension up travel.
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
3.5 in Stock 4.50 in 35 in TBD
  • 2012-2018 Models with 3.6L Pentastar motor will require exhaust modification for driveshaft clearance at full suspension droop, use JKS8150 exhaust extensions.
  • Rubicon sway bar link hardware included in kit
  • With so many variables of wheel size, offset/backspacing, tire size, brands and styles, the exact amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders, etc. to eliminate tire rubbing.
MakeModelYear
JeepWrangler (JK)2007-2018