Camburg Toyota Tundra 2wd/4wd 22-24 FOX 3.0 DSC Performance Kit

Code: N/A
  • Improved ride & handling
  • Easy bolt-on installation
  • Made in the USA

$8,179.89$11,899.88

In Stock
Clear

Description

Our FOX 3.0 DSC Performance kit for the ’22-24 Tundra takes our FOX 2.5 kit to the next level. We utilize FOX’s 3.0 Factory Series internal bypass front coilovers with DSC compression adjusters. This uses FOX’s patented internal bypass design which offers damping progression as they are position sensitive. You have considerably more bottoming control with a plush ride. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The DSC compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. This combination of parts not only improves the ride and handling on-road but more so off-road. With our upper control arms these coilovers increase wheel travel and articulation. These also have FOX’s finned aluminum reservoirs with dual recirculating reservoir lines that aid in lowering shock temps under hard use.

  • Improved ride both on and off-road
  • Eliminates weak upper ball-joint
  • Increased wheel travel
  • Corrected suspension geometry
  • Made in the USA

After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice.

In the rear we go with a pair of FOX’s 3.0 Factory Series internal bypass shocks with DSC compression adjusters. This uses FOX’s patented internal bypass design which offers damping progression as they are position sensitive. You have considerably more bottoming control with a plush ride. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The DSC compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. Since they are longer in length they increase rear wheel travel and articulation. These also have FOX’s finned aluminum reservoirs with recirculating oil that aids in lowering shock temps under hard use.

As an upgrade we recommend our rear trailing arm kit. They’re considerably stronger, pivot on 1″ FK uniball bearings for more wheel travel and articulation.

This kit is for the serious off-roader looking for the biggest and best parts out there.

Important: If you have a 4wd base or Sport model with black front axle shafts, you will need Toyota’s OEM red axle shaft assemblies that are on the TRD Offroad and TRD Pro models as they are longer in length and required for the added wheel travel the FOX coilovers allow for. The OEM part numbers for the red axles are 43420-0C020 & 43410-0C020 and can be purchased through us or your local Toyota dealer. If your truck has the optional TRD 3″ lift kit installed, the silver axles supplied in that kit will also work with the FOX coilovers. Click HERE for axle images.

For more detailed info on all these parts, check out their individual product pages by clicking on the links below …


CAProp65

  • FOX Factory Series 3.0 DSC Coilovers (883-06-219)
  • Camburg Upper Arms (Options: Billet CAM-310189-GRY | Uniball CAM-310197)
  • FOX Factory Series 3.0 DSC Rear Shocks (883-26-140)

Options:

  • Camburg KINETIK Series Rear Trailing Arm Kit (# CAM-320029-GRY)
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
2-3 in (front) Stock 17-20 in 5.75 in 33-37 in $1,250 + $185 align
  • On models with Adaptive Variable Suspension (AVS), electronic shock tuning is disabled.
  • If you have a 4wd base or Sport model with black front axle shafts, you will need Toyota’s OEM red axle shaft assemblies that are on the TRD Offroad and TRD Pro models as they are longer in length and required for the added wheel travel the FOX coilovers allow for. The OEM part numbers for the red axles are 43420-0C020 & 43410-0C020 and can be purchased through us or your local Toyota dealer. If your truck has the optional TRD 3″ lift kit installed, the silver axles supplied in that kit will also work with the FOX coilovers.
  • With so many variables of wheel size, offset/backspacing, tire size, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders and/or modify the body mount behind the front tires to eliminate tire rubbing.
  • 20″ OEM wheels & tires and 18″ OEM wheels with larger tires then stock will not work with this suspension system.
MakeModelYear
ToyotaTundra2022-2024

You may also like…