Camburg Chevy/GMC 1500 2wd 99-06 Performance 6.5 Kit

Code: CAM-210001
  • Fabricated spindles
  • 6″ lift
  • 10″ wheel travel
  • 1.5″ wider per side
  • Made in the USA


In Stock


The next best thing to a long travel kit. Our Chevy 1500 performance 6.5 kit will give you 10″ of wheel travel and 1.5″ wider per side track-width. This system is designed to give you great off-road performance. By eliminating the upper stock ball joint (weak link) with a 1″ FK uniball we gain a great amount of wheel travel and strength. We also chose to eliminate the stock cast spindles and replace them with a pair of our fabricated spindles. These spindles use some of the same parts found in our long travel system. If you are looking for wheel travel, ground clearance, and strength look no further. The Camburg Performance 6.5 kit is what you need.

  • Fabricated spindles
  • 6″ lift
  • 10″ wheel travel
  • 1.5″ wider per side
  • Made in the USA

You will need to lift the rear of the truck around 2.5″+/-  to go along with this kit. We recommend Deaver’s mini-pack or complete leaf springs with longer Bilstein 5100 shocks.


  • Fabricated Spindles
  • Tubular Chromoly Upper Arms
  • Coil Springs
  • Bilstein 5100 Front Shocks (24-185400)
  • 10″ Limit Straps/Mounts (welding required for lower mount)
  • Stainless Steel Extended Front Brake Lines (CAM-230001)
  • Grade 8 Hardware
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
6 in (front) 10 in (front) +1.5 in per side 16-20 in 4.75 in 33-35 in $1,000 + $185 align
  • You will need to run fiberglass front fenders with 35″ tires.
  • Limit strap installation requires minor welding & drilling.
  • Factory upper arm frame droop stops must be removed or damage to our upper arm will occur due to the increase in wheel travel.
  • You will need to lift the rear around 2.5″+/-

We build these in limited production runs throughout the year so availability could be delayed

Chevrolet/GMCSilverado/Sierra 15001999-2006

You may also like…