The Camburg long travel Silverado kit is a huge upgrade in suspension performance. To start we made a fully fabricated spindle, a boxed lower arm with internal gusseting, In our new Gen2 coilover/bypass design we have the lower shock mounts sunk into the arms. We also have available a weld-on bucket style shock mount that is setup for a 2.5 x 8″ coilover and a 2.5 x 8″ bypass shock. 1″Uni-Ball lower pivots for the lower A-Arms and 3/4″ heims for the upper arm to pivot off of. The factory ball joints were changed out to 1″ Uni-balls upper and 1.5″ lower. Others will mount there 1″ uni-balls single sheer, this is not as strong as the “double sheer” mounting we do upper and lower. There are 2x 1.5″ uni-balls 6x 1″ uni-balls, 2x 7/8″ heims, and 6 3/4″ heims in the system. The total of these parts with spacers and hardware is over $1500, this is why our kit LOOKS expensive but you just get what you pay for! You will need a set of Fiberglass fenders to make room for your tires.
This kit is for the serious offroader and requires extensive fabrication. We recommend a qualified off-road race shop to install and setup this suspension system.