Camburg Toyota Tacoma 2wd/4wd 16-23 Performance Slapper Lower Control Arm Kit

Code: N/A
  • Stock length replacement
  • Designed for Slapper Bump Stop System
  • Uniball frame pivots


In Stock


Our NEW performance lower arms are a definite upgrade for Tacoma owners. Being stock length you’re able to use your existing coilovers and upper arms and don’t have to get into fiberglass fenders and extended axles like you would with a long-travel kit. We’ve incorporated our optional Slapper bump stop system to work with these for additional bottom out control. This allows for a soft plush ride through the small stuff that doesn’t bottom out easily through the bigger hits and g-outs. With stock length lower arms, this system performs better than a secondary bypass shock and packages much easier. Follow the link prior for more info.

When designing these arms, we set them up for maximum useable wheel travel along with the correct shock motion ratio geometry. CAD/CAM engineered, these arms are consideraby stronger than the stock arms and were designed to maximize ground clearance and off-road performance. They have internal gusseting and pivot on FK 1″ uniballs at the frame rather than cheap rubber or polyurethane bushings that constantly bind and flex under braking. Uniballs allow for zero binding when the suspension cycles up and down and has zero flex under braking so your geometry and alignment is always consistent. With Tacoma’s being aligned by the lower arm, a uniball setup also allows for a bind free adjustment and you’re able to torque all the bolts without putting it into a bind. Since the uniball spacers are 1.50” in diameter, you have better clamping force in the frame mounts due to the increased surface area which keeps the holes from ovaling out over time unlike a small diameter sleeve used in a bushing. This also keeps the alignment cams from loosening up from off-road use.

The arms are laser cut, CNC formed, MIG welded, powder coated Camburg gray and are ready to install with all the necessary hardware included. These are by far the strongest stock length aftermarket arms out on the market. Combine these with our KINETIK billet upper control arms, Slapper bump stop system and FOX or King coilovers for the ultimate stock width setup.


Lower Arm Kit (CAM-310167):

  • Boxed lower control arms (stock width)
  • Stainless uniball spacers
  • Machined factory bump stop spacer


Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
Stock 16-20 in See Notes $650-1,450 + $185 align
  • When running larger than stock tires we recommend a zero offset wheel (maximum backspacing = 4.75″)
  • Welding/Cutting/Grinding is required to install the Slapper bump stop frame mounts along with removing the factory mounts from the frame.



You may also like…