Camburg Toyota 4-Runner 03-09 | FJ 07-09 King 2.5 Performance Kit

Sku:

Clear

Our King 2.5 Performance kit for the Toyota 4-Runner takes our leveling kit to the next level. We utilize Kings’s 2.5 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel.

  • Improved ride both on and off-road
  • Eliminates weak upper ball-joint
  • Increased wheel travel
  • Corrected suspension geometry
  • Made in the USA

After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more.  You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice.

In the rear we go with a pair of King’s 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re the truck. Since they are longer in length they increase rear wheel travel and articulation.


CAProp65

  • King 2.5 Remote Coilovers w/ Compression Adj. (25001-124A-EXT)
  • Camburg KINETIK Series Billet Uniball Upper Arms (CAM-310103) or Camburg 1.25 Uniball Upper Arms (CAM-310036)
  • King 2.5 Remote Rear Shocks w/ Compression Adj. (25001-125A-EXT)
  • On rare X-Reas equipped models you will need to remove and drain the short hydraulic hoses that connect to the OEM shocks. There are no electronics and its a primitive stand-alone system connecting the rear shocks to the front shocks hydraulically.
  • With so many variables of wheel sizes, offset/backspacing, tire sizes, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders and/or modify the body mount behind the front tires to eliminate tire rubbing.
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
0-3 in (front) Stock 16-20 in 4.75 in 285/75/16 | 285/70/17 $1,250 + $85 align

Camburg Toyota 4-Runner ’03-09 | FJ ’07-14 Rear 1.5″ Coil Spring Kit

$250.00

  • Approx. 1.5" rear lift
  • 12% increased spring rate
  • Made in the USA

MakeModelYear
Toyota4-Runner (2wd)2003-2009
Toyota4-Runner (4wd)2003-2009
ToyotaFJ Cruiser (4wd)2007-2009
Top