Camburg Ford Raptor 17-20 Performance Long Travel Kit



Here are some quick facts with more info and pics to come.

  • Increased track-width 1.5″ per side (3″ wider total)
  • Front wheel position is pushed forward 1″ for added tire clearance at firewall to eliminate/minimize rubbing/trimming.
  • Designed for 37″ tires.
  • 15% increased wheel travel
  • Boxed lower arms with 1″ uniball pivots at the frame. Tabbed for secondary bypass shock.
  • Bolt on aluminum skid plates for lower control arms.
  • Billet upper arm with 7/8 heims at the frame and a large 1.50 uniball at the spindle/knuckle.
  • 17-4 stainless heim steering conversion outer tie rod that corrects bumpsteer geometry utilizing the factory inner tie rod for rack longevity.
  • Stronger AN aircraft bolts for steering, bypass shock and bump stop pivots.
  • Designed to use the OEM coilovers or 3.0 aftermarket coilovers
  • Designed to use a specific FOX 3.5 bypass shock for increased bottoming control and progression.
  • Heat-treated 4340 extended length front axle shafts with new CV boot clamps.
  • Optional weld-on bypass frame mount.
  • Optional FOX 2.5 bump stop kit.
  • Designed to use aftermarket fiberglass front fenders (2-2.5″ flare). We recommend Advanced Fiberglass Concepts, Fiberwerx or SDHQ.


Long Travel Kit:

  • Boxed lower arms w/ bolt-on aluminum skid plates
  • Billet 1.50 uniball upper arms with heim pivots
  • 4340 extended length axle shafts
  • Heim outer tie rods
  • Hardware


  • FOX coilovers
  • Camburg FOX 2.5 bump stop kit
  • FOX 3.5 bypass shocks
  • Camburg weld-on bypass mounts
  • Must run fiberglass front fenders
  • This will not work on a F-150 as a conversion
  • 19-20 models with DSC coilovers (non Live Valve) require Damper Interface Module.
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
2 in 14-15 in 1.5"+ per side 17-20 in 4.75 in 37 in $2,200 - $3,500 + $85 align

Deaver Ford Raptor 17-20 | F-150 4wd 15-20 Rear Leaf Spring Kit

  • Progressive spring-rate design
  • Eliminates factory lift block
  • Made in the USA


ORR Ford Raptor 19-20 Damper Interface Module

  • For 2019+ Raptors only
  • Plug & Play technology
  • Made in the USA


ADV Ford Raptor 17-19 2″ Front Fiberglass Fenders

  • Fiberglass front fenders
  • For our long-travel kit
  • 2" flare / 2" rise
  • Made in the USA