Camburg Ford Raptor 10-14 Performance 1.25 Uniball Upper Arms

Camburg Ford Raptor 17-18 Performance 1.25 Uniball Upper Arms

Sku: CAM-110134

Quick Overview
  • Increases usable wheel travel
  • Corrects camber and caster
  • Eliminates weak factory ball-joints
  • 1.25″ FK uniballs

Made in the USA



For the ’17-18 Ford Raptors we offer our 1.25″ uniball upper arms that use polyurethane bushings. You’re able to use the factory offset wheels and tires. When running larger 37″ tires you want to use a zero offset wheel. These do NOT work on the 2019+ models that have a position sensor incorporated into the new FOX electronic suspension.

When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint with a uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. We also maximize useable wheel travel by using a uniball that has more mis-alignment than the factory ball-joint.

  • Increases usable wheel travel
  • Corrects camber and caster
  • Eliminates weak factory joints
  • 4130 chromoly construction
  • Made in the USA FK PTFE lined 1.25″ uniballs
  • Heat-treated stainless uniball spacers
  • Made in the USA


Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
Stock 17-20 in 5.75 in 35-37 in $450 + $85 Align

When using the factory OEM 17″ wheel, you may need a 1/4″ – 3/8″ wheel spacer when running larger 37″ or wider tires than stock.

Additional Information

Weight 20 lbs
Dimensions 16 x 14 x 6 in