Bilstein Toyota Tacoma Pre/4wd 05-15 6112 Adj. Shock & Coil Kit

Bilstein Toyota 4-Runner 2wd/4wd 03-09 6112 Adj. Shock & Coil Kit

Sku: 47-260153

Quick Overview

Designed for the serious off-road adventure seeker, the all new BILSTEIN 6112 Series Kit is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control.

Quantity

$799.00

Designed for the serious off-road adventure seeker, the all new BILSTEIN 6112 Series Kit is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit features specially designed cold wound springs and an adjustable spring seat which allows for vehicle leveling, larger tires, and increased ground clearance. The kit comes with (2) 60mm shocks (2) springs and (2) billet spring seats. The 6112 is a direct bolt on application for late model half-ton trucks and SUVs which utilize a factory coilover suspension. The 6112 kit is for front applications and reuses the OEM top mount and spring isolators. To maximize performance, Bilstein recommends a 5100 or 5160 Series remote reservoir shocks for the rear.


CAProp65

  • Shocks
  • Coil Springs
  • Spring Seats
  • On rare X-Reas equipped models you need to replace front & rear shocks together and will need to remove and drain the short hydraulic hoses that connect to the OEM shocks. There are no electronics and its a primitive stand-alone system connecting the rear shocks to the front shocks hydraulically.
  • With so many variables of wheel sizes, offset/backspacing, tire sizes, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders and/or modify the body mount behind the front tires to eliminate tire rubbing.
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
1-2.75 in (front) Stock Stock 16-20 in 4.75 in 285/75/16 | 285/70/17 $650 + $85 Align

Camburg Toyota 4-Runner ’03-20 | FJ ’07-14 Performance Balljoint Upper Arm Kit

  • Increases usable wheel travel
  • Corrects camber and caster
  • Heavy-duty ball-joints
Made in the USA
$599.00

Bilstein Toyota 4-Runner 03-20 | FJ 07-14 5100 Rear Shocks

Bilstein 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers...

$276.00

Camburg Toyota 4-Runner 03-20 | FJ 07-14 1.25 Performance Uniball Upper Arms

  • Increases usable wheel travel
  • Corrects camber and caster
  • Eliminates weak factory ball-joints
  • 1.25″ FK uniballs
$699.00
MakeModelYear
Toyota4-Runner (2wd)2003-2009
Toyota4-Runner (4wd)2003-2009
Top