Showing 1–64 of 274 Result

  • Categories : Suspension, Control Arms

    Camburg 1.00 Uniball UCA Replacement Kit

    $112.00 CAM-010046
    Quick Overview

    This kit is what’s required to rebuild the uniballs in your Camburg upper arms or your Camburg spindles. The kit includes two FK Made in the USA PTFE-lined uniballs and two snap rings.

    This kit is what's required to ...

  • Categories : Suspension, Control Arms

    Camburg 1.25 Uniball UCA Replacement Kit

    $114.00 CAM-010047
    Quick Overview

    This kit is what’s required to rebuild the uniballs in your Camburg upper arms. The kit includes two FK Made in the USA PTFE-lined uniballs and two snap rings. Confirm sizing before ordering as some older version arms use a smaller 1.00″ uniball.

    This kit is what's required to ...

  • Categories : Suspension, Control Arms

    Camburg 1.50 Uniball UCA Replacement Kit

    $136.00 CAM-010048
    Quick Overview

    This kit is what’s required to rebuild the uniballs in your Camburg upper arms. The kit includes two FK Made in the USA PTFE-lined uniballs and two snap rings. Confirm sizing before ordering as some older version arms use a smaller 1.00″ uniball.

    This kit is what's required to ...

  • Categories : Suspension, Control Arms

    newCamburg Ford Raptor 2017 KINETIK Series Billet Upper Arms

    $1,395.00 CAM-110135
    Quick Overview

    Coming soon … our new KINETIK Series billet upper control arms for the 2017 Ford SVT Raptor.

    • CNC machined from aircraft quality 6061 aluminum
    • FK 7/8″ heim joints
    • FK 1.25″ uniballs
    • Corrected caster & camber for lifted trucks
    • Made in the USA
    Coming soon ... our new KINETIK ...

  • Camburg Toyota Tundra 2wd/4wd 07-17 KINETIK Series Billet Upper Arms

    $1,395.00 CAM-310104
    Quick Overview

    We’re proud to release our new line of Camburg KINETIK Series billet upper control arms for the 2007-2017 Toyota Tundra’s.

    • CNC machined from aircraft quality 6061 aluminum
    • FK 7/8″ heim joints
    • FK 1.50″ uniballs
    • Corrected caster & camber for lifted trucks
    • Made in the USA
    We’re proud to release our new ...

  • FOX Ford F-150 4WD 14-17 Factory 2.5 Kit

    $2,550.00 CAM-110127
    Quick Overview

    Looking to add some race proven performance to your Ford F-150? We have the answer. Utilizing FOX 2.5 Factory Series R/R Coilovers, valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our uniball upper arms address these issues and more. In the rear we go with a pair of FOX’s 2.0 Performance Series shocks for better shock performance offroad and a firmer ride.

    Looking to add some race proven ...

  • FOX Ford F-150 4WD 09-13 Factory 2.5 Kit

    $2,550.00 CAM-110096
    Quick Overview

    Looking to add some race proven performance to your Ford F-150? We have the answer. Utilizing FOX 2.5 Factory Series R/R Coilovers, valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. These Factory Series shocks feature a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, a 7/8″ hard chrome plated heat treated alloy steel shaft and an external reservoir design to separate shock oil from the high-pressure nitrogen. FOX direct replacement shocks deliver race-winning performance in a simple direct replacement bolt on shock. Each application has been rigorously tested by FOX engineers to maximize suspension travel and performance on and off the road.

    Looking to add some race proven ...

  • Categories : Suspension

    Camburg Ford F-150 2wd ’15-17 Bilstein 5100 Entry Level Kit

    $1,220.00 CAM-110132
    Quick Overview

    If you’re looking to level out your F-150 without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our uniball upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control. Our uniball arms eliminate the weak under-sized ball-joints and replace them with a 1.25″ uniball bearing that is considerably stronger, higher quality and allows for more movement without binding. We also correct and improve geometry for proper alignment and better handling with increased caster. For the rear we use Bilstein’s 5100 Series rear shock to improve the ride.

    If you're looking to level out ...

  • Categories : Suspension

    Camburg Ford F-150 4wd ’15-17 Bilstein 5100 Entry Level Kit

    $1,220.00 CAM-110133
    Quick Overview

    If you’re looking to level out your F-150 without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our uniball upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control. Our uniball arms eliminate the weak under-sized ball-joints and replace them with a 1.25″ uniball bearing that is considerably stronger, higher quality and allows for more movement without binding. We also correct and improve geometry for proper alignment and better handling with increased caster. For the rear we use Bilstein’s 5100 Series rear shock to improve the ride.

    If you're looking to level out ...

  • Categories : Suspension

    Camburg Ford F-150 4wd 2014 Bilstein 5100 Entry Level Kit

    $1,220.00 CAM-110131
    Quick Overview

    If you’re looking to level out your F-150 without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our uniball upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control. Our uniball arms eliminate the weak under-sized ball-joints and replace them with a 1.25″ uniball bearing that is considerably stronger, higher quality and allows for more movement without binding. We also correct and improve geometry for proper alignment and better handling with increased caster. For the rear we use Bilstein’s 5100 Series rear shock to improve the ride.

    If you're looking to level out ...

  • Categories : Suspension

    Camburg Ford F-150 2wd 09-13 Bilstein 5100 Entry Level Kit

    $1,180.00 CAM-110117
    Quick Overview

    If you’re looking to level out your F-150 without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our uniball upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control. Our uniball arms eliminate the weak under-sized ball-joints and replace them with a 1.25″ uniball bearing that is considerably stronger, higher quality and allows for more movement without binding. We also correct and improve geometry for proper alignment and better handling with increased caster. For the rear we use Bilstein’s 5100 Series rear shock to improve the ride.

    If you're looking to level out ...

  • Camburg Ford F-150 4wd 09-13 Bilstein 5100 Entry Level Kit

    $1,180.00 CAM-110102
    Quick Overview

    If you’re looking to level out your F-150 without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our uniball upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control.

    If you're looking to level out ...

  • FOX Ford F-150 4wd 04-08 Factory 2.5 Kit

    $2,550.00 CAM-110108
    Quick Overview

    Looking to add some race proven performance to your Ford F-150? We have the answer. Utilizing FOX 2.5 Factory Series R/R Coilovers, valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. These Factory Series shocks feature a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, a 7/8″ hard chrome plated heat treated alloy steel shaft and an external reservoir design to separate shock oil from the high-pressure nitrogen. FOX direct replacement shocks deliver race-winning performance in a simple direct replacement bolt on shock. Each application has been rigorously tested by FOX engineers to maximize suspension travel and performance on and off the road.

    Looking to add some race proven ...

  • Categories : Suspension, Control Arms

    Camburg Ford F-150 2wd/4wd 04-17 1.25 Performance Uniball Upper Arms

    $699.00 CAM-110078
    Quick Overview

    When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling.

    When lifting your truck, the stock ...

  • Camburg Ford F-150 4wd 09-15 L/T Kit

    $3,300.00$7,895.00 CAM-110122
    Quick Overview

    Looking to build your F-150 to a higher level than Ford did with the SVT Raptor? Our long-travel kit for the 2009-2013 4-wheel drive F-150’s utilizes a lot of our Raptor suspension components and takes it to the next level. More wheel travel, a wider track width, improved geometry, stronger & higher quality parts and increased dampening  all add up to a suspension kit that works better both on and off-road. This is how the Raptor should have come from the factory.

    Looking to build your F-150 to ...

  • Categories : Suspension, Spindles

    Camburg Ford F-150 2wd ’09-15 Performance 4.5 Spindle Kit

    $1,195.00$1,295.00 CAM-110123
    Quick Overview

    *** COMING SOON | IN PRODUCTION ***

    *** COMING SOON | IN PRODUCTION ...

  • Camburg Ford F-150 2wd 04-08 Performance 7.0 Kit

    $2,200.00$3,950.00 CAM-110004
    Quick Overview

    This kit rivals most long travel kits for your F-150 2wd 04-08 truck. With 12″ of wheel travel, full heim steering, and 1″ uniball fabricated spindles this kit will make a great truck into a really nice prerunner. 4″ of ground clearance is added into the custom fabricated spindle and up to 3″ of lift with the coilover you can set up your truck with 4.5″-7″. Added castor for better handling, long travel race spindle technology, fully adjustable ride height are a few of the reasons why this kit is the best available. We have a specific FOX or King coilover for this kit that yields maximum travel. This kit will also work with aftermarket bolt on coilovers but will get a little less wheel travel.

    This kit rivals most long travel ...

  • Camburg Ford F-150 2wd 04-08 Race L/T Kit

    $5,500.00$10,060.00 CAM-110020
    Quick Overview

    This is our F-150 2WD 04-08  long travel off-road system. This system is made up of custom fabricated spindles, heim upper a-arms, complete heim steering, coilover and by-pass shock mounts, stainless steel extended brake lines and all hardware. This system utilizes 1″ uni-balls for the lower A-arm pivots at the frame for precision and strength (no cheap bushings like the other guys). Up to 18″ of wheel travel and 7″ added ground clearance.  Billet aluminum race hubs are also included with 2″ hollow snout spindles and custom 13″ rotors.

    This is our F-150 2WD 04-08  ...

  • FOX Ford Raptor 4wd 10-14 Performance 3.0 Kit

    $5,695.00 CAM-110097
    Quick Overview

    At FOX, racing has always been the cornerstone of their  product development. Their 3.0 Factory Series Coil-over Internal Bypass, position-sensitive shocks maximize the entire wheel travel, increases oil capacity, and adds 60% more damping area over the stock FOX SVT shocks. In the rear FOX went all out on the SVT Raptor fitting its huge FACTORY Series 3.0 Bypass shocks that are also found on Brian Deegans & Bryce Menzies championship winning short course trucks. Our upper arms are made with US 4130 chromoly tubing, heat treated stainless steel hardware, and US made FK 1.50″ uni-balls. Main improvements are 7/8″ heim pivots for more adjustment, less flex, and a more precision cycle of travel.

    At FOX, racing has always been ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance 1.50 Uniball Heim Upper Arms

    $999.00 CAM-110079
    Quick Overview

    Here are our Camburg 1.50 uniball upper arms for the Ford SVT Raptor. These arms are made with US 4130 chromoly tubing, heat treated stainless steel hardware, and US made FK 1.50″ uni-balls. Main improvements are 7/8″ heim pivots for more adjustment, less flex, and a more precision cycle of travel. The strength of these upper arms are far superior to the factory units because of the much larger tube size and the huge 1.50″ uni-ball which is the same version as on our Trophy Truck. These upper arms will also allow more wheel travel when combined with other aftermarket shocks.

    Here are our Camburg 1.50 uniball ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance 1.25 Uniball Upper Arms

    $699.00 CAM-110109
    Quick Overview

    We now have available for the Ford Raptors our 1.25″ uniball upper arms that use polyurethane bushing versus heims like on our 1.50″ uniball versions. This keeps the cost down with less maintenance. Also by using a smaller uniball you’re able to use the factory offset wheels and tires.

    We now have available for the ...

  • Categories : Suspension, Control Arms

    newCamburg Ford Raptor 2017 Performance 1.25 Uniball Upper Arms

    $699.00 CAM-110134
    Quick Overview

    Coming soon for the NEW 2017 Ford Raptors is our 1.25″ uniball upper arms that use polyurethane bushings. You’re able to use the factory offset wheels and tires. When running larger 37″ tires you want to use a zero offset wheel.

    Coming soon for the NEW 2017 ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance Lower Arm Kit

    $1,895.00 CAM-110098
    Quick Overview

    This arm replaces the stock length lower and gives you the ability to add a hydraulic/air bump-stop and also run limit straps. CAD designed, this arm is considerably stronger than the cast aluminum stock arm, has internal gusseting and pivots on FK 1″ PTFE lined uniballs at the frame rather than the cheap rubber bushings that constantly bind and flex under braking. We use a FK PTFE lined 1.50″ uniball at the spindle for maximum strength and articulation rather than the factory ball-joint. No modification to the spindle is necessary as we use machined heat-treated stainless steel mis-alignment spacers that adapt the uniball to the tapered ball-joint spindle hole. It also has a provision to use the factory sway-bar with our optional sway-bar link kit.

    This arm replaces the stock length ...

  • Categories : Suspension, Control Arms

    Camburg Ford Raptor 10-14 Performance Dual Shock Lower Arm Kit

    $2,195.00 CAM-110111
    Quick Overview

    This arm replaces the stock length lower and gives you the ability to  run a secondary bypass shock for increased dampening and also add a hydraulic/air bump-stop. We developed in-house a FOX 3.0 bypass shock to be used with these lower arms that are valved specifically for the Raptor with a custom bypass tube layout and configuration. When designing this arm we set it up for maximum useable wheel travel along with the correct shock motion ratio geometry, we made no compromises.

    This arm replaces the stock length ...

  • Categories : Suspension, Spindles

    Camburg Ford SVT Raptor 10-14 Performance Spindle Kit

    $2,195.00 CAM-110126
    Quick Overview

    We’ve spent some long days and nights designing and testing our Camburg Raptor performance spindles. CAD designed with stress analyzing we’ve come up with a product that surpasses the factory part not only in strength, but in quality and attention to detail. It’s the detail work that sets our product apart from others. We use the highest quality materials and manufacturing techniques when building these. We water-jet cut the thick plates, MIG weld them, then CNC machine them in-house to 0.001” tolerances after welding for precision fitment of the hubs and driveline assembly. We then MIG and TIG weld the remaining 4130 chromoly gussets, plates and machined components and powercoat them in our trademark Camburg steel gray. We include stronger and longer bolts for the brake calipers and hub assembly as we increase the thickness in those areas for added strength.

    We've spent some long days and ...

  • Camburg/FOX Raptor Performance 3.0 Front Bypass Shocks (pair)

    $2,400.00 CAM-110119
    Quick Overview

    We worked with FOX extensively to develop a 3.0 bypass shock to work with their 3.0 internal bypass coilovers in our Performance Series lower arms. With the specific bypass tube layout, piston design and valving we came up with a setup that works very well both on and off-road. These shocks can also be upgraded to use FOX’s new QAB Quick Adjusters.

    We worked with FOX extensively to ...

  • Camburg Ford Raptor 10-14 Performance Bypass Mount Kit

    $450.00 CAM-110112
    Quick Overview

    We now have available the bypass mount that matches up to our dual shock performance lower arms. These weld onto the frame and locate off the top of the coil bucket. We powdercoated these matte black minus the areas that get welded. Those spots get touched up after installation.

    We designed this around a specific FOX 3.0 bypass shock and ICON has also developed a bypass shock to work in conjunction with our kit.

    We now have available the bypass ...

  • Categories : Suspension, Shocks

    Camburg Ford Raptor 10-14 Performance Retro-fit Weld-on Lower Bypass Shock Mounts

    $195.00 CAM-110118
    Quick Overview

    If you already have our single shock Raptor Performance lower arms you can weld these pre-made mounts to your existing lower arms to add a bypass shock. No need selling your current arms and buying our dual shock version. Once welded on and re-powder-coated, you would never know the difference.

    If you already have our single ...

  • Camburg Ford Raptor 10-14 LCA Sway-bar End Link Kit

    $449.00 CAM-110114
    Quick Overview

    Normally we remove the factory sway-bar with our performance lower arms to allow the suspension to be truly independent. For instances where the customer wants to keep the sway-bar, we now have an end link kit that works with our lower arms and with optional spacers can be used with the stock lower arms to replace the weaker factory version.

    Normally we remove the factory sway-bar ...

  • Categories : Suspension, Shackles

    Camburg Ford Raptor 10-14 | F-150 09-16 Rear TIG 4130 Shackles

    $250.00 CAM-120018
    Quick Overview

    Looking for the best? Our Camburg TIG shackles replace the stock light-duty version your Ford Raptor/F-150 is equipped with from the factory. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle.

    Our TIG shackles are a fabricated boxed gusseted design from 4130 chromoly  that is much stronger and use polyurethane bushings that pivot smoother with less flex. We TIG weld them, bead blast the surfaces then electroless nickel plate them and have them stress relieved afterwards.

    Looking for the best? Our Camburg ...

  • Camburg Ford Raptor 10-14 | F-150 09-16 Rear MIG Shackles

    $160.00 CAM-120017
    Quick Overview

    Our Camburg MIG shackles replace the stock light-duty version your Ford Raptor/F-150 is equipped with from the factory. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are vulcanized into the shackle.

    Our shackles are a fabricated boxed gusseted design that is much stronger and use polyurethane bushings that pivot smoother with less flex. They are MIG welded and powder-coated in our matte black finish and ready to be bolted on using the factory hardware.

    Our Camburg MIG shackles replace the ...

  • Categories : Suspension, Shackles

    Camburg Ford Bronco 80-96 / F-150 04-14 / Raptor 1.5 MIG Shackles

    $160.00 CAM-120005
    Quick Overview

    Our extended shackle is designed around using Deaver leaf springs. These are longer length  than the stock shackles and allow for maximum wheel travel. The stock shackles are too short and limit droop. These are 1.5″ longer than stock. Since the shackles are longer, they will lower the ride height compared to the stock shackles. These fit the OEM 3″ wide leaf springs.

    Our extended shackle is designed around ...

  • Camburg Chevy/GMC 1500 2wd/4wd ’14-17 FOX 2.5 Factory DSC Kit (OEM Alum)

    $3,790.00 CAM-210045
    Quick Overview

    If you want the best in performance and style for your Chevy 1500, our Camburg coil-over kits are the way to go. There is no better way to lift your truck than bolting on a Camburg 2.5 Series coil-over. These give you the ability to lift and vastly improve the ride quality both on and off-road. Each coil-over is designed to gain maximum wheel travel with an aftermarket upper arm all while keeping CV joints, tie rods, uni-balls and ball-joints in their working ranges. FOX now offers their standard Factory 2.5 remote reservoir version and for the ultimate combination their new DSC version.  Both shocks have a 2.5″ diameter shock body for added oil capacity for aggressive use both on and offroad. Based on their race shocks, they are fully rebuild-able and revalve-able for optional tuning and maintenance. The remote external reservoirs increase the oil capacity for lower operating temperatures and the Dual Speed Compression (DSC) adjuster gives remarkable versatility and precise tuning. A simple twist of either two adjuster knobs allows twelve separate low-speed and ten high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height and comes pre-set to level your vehicle right out of the box. These 2.5 coilovers are designed to be used with our Camburg upper arms for maximum useable wheel travel and performance. Cheap spacer lifts and shocks are no comparison.

    If you want the best in ...

  • Camburg Chevy/GMC 1500 2wd/4wd ’07-17 FOX 2.5 Factory DSC Kit (OEM Steel)

    $3,790.00 CAM-210044
    Quick Overview

    If you want the best in performance and style for your Chevy 1500, our Camburg coil-over kits are the way to go. There is no better way to lift your truck than bolting on a Camburg 2.5 Series coil-over. These give you the ability to lift and vastly improve the ride quality both on and off-road. Each coil-over is designed to gain maximum wheel travel with an aftermarket upper arm all while keeping CV joints, tie rods, uni-balls and ball-joints in their working ranges. FOX now offers their standard Factory 2.5 remote reservoir version and for the ultimate combination their new DSC version.  Both shocks have a 2.5″ diameter shock body for added oil capacity for aggressive use both on and offroad. Based on their race shocks, they are fully rebuild-able and revalve-able for optional tuning and maintenance. The remote external reservoirs increase the oil capacity for lower operating temperatures and the Dual Speed Compression (DSC) adjuster gives remarkable versatility and precise tuning. A simple twist of either two adjuster knobs allows twelve separate low-speed and ten high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height and comes pre-set to level your vehicle right out of the box. These 2.5 coilovers are designed to be used with our Camburg upper arms for maximum useable wheel travel and performance. Cheap spacer lifts and shocks are no comparison.

    If you want the best in ...

  • Camburg Chevy/GMC 1500 2wd/4wd ’14-17 Fox Performance 2.5 Kit (OEM Alum)

    $2,250.00 CAM-210039
    Quick Overview

    If you want the best in performance and style for your Chevy 1500, our Camburg coil-over kits are the way to go. There is no better way to lift your truck than bolting on a Camburg 2.5 kit.  These give you the ability to lift and vastly improve the ride quality both on and off-road. Each coil-over is designed to gain maximum wheel travel with an aftermarket upper arm all while keeping CV joints, tie rods, uni-balls and ball-joints in their working ranges. FOX now offers their standard Factory 2.5 remote reservoir version and for the ultimate combination their new DSC version.  Both shocks have a 2.5″ diameter shock body for added oil capacity for aggressive use both on and offroad. Based on their race shocks, they are fully rebuild-able and revalve-able for optional tuning and maintenance. The remote external reservoirs increase the oil capacity for lower operating temperatures and the Dual Speed Compression (DSC) adjuster gives remarkable versatility and precise tuning. A simple twist of either two adjuster knobs allows twelve separate low-speed and ten high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height and comes pre-set to level your vehicle right out of the box.

    If you want the best in ...

  • Camburg Chevy/GMC 1500 2wd/4wd ’07-17 Fox Performance 2.5 Kit (OEM Steel)

    $2,250.00 CAM-210038
    Quick Overview

    If you want the best in performance and style for your Chevy 1500, our Camburg coil-over kits are the way to go. There is no better way to lift your truck than bolting on a Camburg 2.5 Series coil-over. These give you the ability to lift and vastly improve the ride quality both on and off-road. Each coil-over is designed to gain maximum wheel travel with an aftermarket upper arm all while keeping CV joints, tie rods, uni-balls and ball-joints in their working ranges. FOX now offers their standard Factory 2.5 remote reservoir version and for the ultimate combination their new DSC version.  Both shocks have a 2.5″ diameter shock body for added oil capacity for aggressive use both on and offroad. Based on their race shocks, they are fully rebuild-able and revalve-able for optional tuning and maintenance. The remote external reservoirs increase the oil capacity for lower operating temperatures and the Dual Speed Compression (DSC) adjuster gives remarkable versatility and precise tuning. A simple twist of either two adjuster knobs allows twelve separate low-speed and ten high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height and comes pre-set to level your vehicle right out of the box. These 2.5 coilovers are designed to be used with our Camburg upper arms for maximum useable wheel travel and performance. Cheap spacer lifts and shocks are no comparison.

    If you want the best in ...

  • Camburg Chevy/GMC 1500 2wd/4wd ’14-17 KING 2.5 Performance Kit (OEM Alum)

    $2,980.00 CAM-210043
    Quick Overview

    Our King 2.5 Performance kit for the  Chevy/GMC 1500 takes our leveling kit to the next level. We utilize the same Camburg 1.25″ uniball upper arms but combine them with KING’s 2.5 series front and rear shocks. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel.

    • Improved ride both on and off-road
    • Eliminates weak upper ball-joint
    • Increased wheel travel
    • Corrected suspension geometry
    • Made in the USA
    Our King 2.5 Performance kit for ...

  • Camburg Chevy/GMC 1500 2wd/4wd ’07-17KING 2.5 Performance Kit (OEM Steel)

    $2,980.00 CAM-210042
    Quick Overview

    Our King 2.5 Performance kit for the  Chevy/GMC 1500 takes our leveling kit to the next level. We utilize the same Camburg 1.25″ uniball upper arms but combine them with KING’s 2.5 series front and rear shocks. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms these shocks increase wheel travel.

    • Improved ride both on and off-road
    • Eliminates weak upper ball-joint
    • Increased wheel travel
    • Corrected suspension geometry
    • Made in the USA
    Our King 2.5 Performance kit for ...

  • Categories : Suspension, Control Arms

    Camburg Chevy/GMC 1500 2wd/4wd 07-17 1.25 Performance Uniball Upper Arms (OEM Steel)

    $699.00 CAM-210013
    Quick Overview

    When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling.

    When lifting your truck, the stock ...

  • Categories : Suspension, Control Arms

    Camburg Chevy/GMC 1500 2wd/4wd 14-17 1.25 Performance Uniball Upper Arms (OEM Alum)

    $699.00 CAM-210030
    Quick Overview

    When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling.

     

    When lifting your truck, the stock ...

  • Camburg Chevy 1500 2wd 99-06 Performance 6.5 Kit

    $2,000.00 CAM-210001
    Quick Overview

    The next best thing to a long travel kit! The all new Chevy Silverado Performance off-Road system by Camburg. This kit will give you 10″ of wheel travel and 1.5″ wider per side. This system is designed to give you great off-road performance. By eliminating the upper stock ball joint ( weak link) with a 1″ Uni-Ball. By doing this we gain a great amount of wheel travel and strength. We also chose to eliminate the stock cast spindles and replace them with a pair of Billet steel fabricated spindles. These spindles use some of the same parts found in our long travel system. If you are looking for wheel travel, ground clearance, and strength look no further. The Camburg Silverado performance system is what you need!

    The next best thing to a ...

  • Camburg Chevy/GMC 1500 2wd 99-06 Gen 2 L/T Kit

    $4,295.00$8,660.00 CAM-210016
    Quick Overview

    The Camburg Long Travel Silverado kit is a huge upgrade in suspension performance. To start we made a fully fabricated spindle, a boxed lower arm with internal gusseting, In our new coilover / by-pass design we have the lower shock m0uts sunk into the arms to fit larger shocks to gain more wheel travel. We also have a new bucket style shock mount that utilizes a coilover and a by-pass shock.  1″Uni-Ball lower pivots for the lower A-Arms and 3/4″ heims for the upper arm to pivot off of.

    The Camburg Long Travel Silverado kit ...

  • Camburg Ford Ranger Edge 2wd 01-12 Entry Level 6.0 Kit

    $1,700.00 CAM-110008
    Quick Overview

    This Entry level off-road system is great for chase trucks and trail use. This system will provide up to 6 more inches of ground clearance. This system will provide added wheel travel over the stock set up as well. Our Off-Road systems do not use drop down brackets like most other kit available.

    This Entry level off-road system is ...

  • Camburg Ford Ranger Edge 2wd 01-12 Performance 6.0 Kit

    $2,100.00 CAM-110009
    Quick Overview

    This performance off-road system is great for chase trucks and trail use. This system will provide up to 6 more inches of ground clearance and yield an awesome 10″ of wheel travel. Our Off-Road systems do not use drop down brackets like most other kits available. This system will also include a dual shock kit with dual 5100 Bilstein shocks.

    This performance off-road system is great ...

  • Camburg Ford Ranger XLT 2wd 98-12 Performance 5.5 Kit

    $1,800.00
    Quick Overview

    This system is an off-road kit with performance in mind. This kit uses a 3″ fabricated race spindles with a massive 1 in Uni-Ball. The upper A-Arm is made with a laser cut pod and 1 1/2″ .120 wall 4130 chromoly tubing. For shocks, Bilstein 5100 series. The coil springs will provide 2.5″ lift. This kit will increase track width by 1.5″ per side giving you a wider stance and added wheel travel. This is why Fiberglass front fenders are recommended. This kit will provide 10″ of travel.

     

    This system is an off-road kit ...

  • Camburg Ford Ranger Edge 2wd 01-12 L/T Kit

    $3,800.00$7,610.00 CAM-110012
    Quick Overview

    The Camburg long travel off road system is by far the best available for the Ranger Edge. This is the same system we used on our Ranger Edge race truck. We have raced with this system at the 2005 Baja 1000 and the 2006 Baja 500 in the Trophy Truck class. This system will yield 19″ of wheel travel (with no ac fan box). This system utilizes a full box construction lower arm with 1 1/2″ lower uni balls and 1″ uniballs for the lower arm pivots (no urethane bushings here). The upper arm is made with 1 1/2″ .120 wall tube, the reason we do this is to fit a coilover and a by pass shock. This system also comes with a full stainless steel steering system, 17-4 stainless inner clevis, and spacers along with the stainless tie rods. Because of the high wheel travel numbers we achieve we use a 1″ outer heim joint and a 3/4″ inner heim.

    The Camburg long travel off road ...

  • Camburg Ford Ranger Edge 2wd 01-12 Race L/T Kit

    $5,500.00$9,810.00 CAM-110013
    Quick Overview

    The Camburg long travel off road system is by far the best available for the Ranger Edge. This is the same system we use on our Ranger Edge race truck. We have raced with this system at the 2005 Baja 1000 and the 2006 Baja 500 in the Trophy Truck class. This system will yield 19″ of wheel travel (with no ac fan box).

    The Camburg long travel off road ...

  • Camburg Ford Ranger XLT 2wd 98-12 L/T Kit

    $3,800.00$7,610.00 CAM-110014
    Quick Overview

    This is the ultimate in high performance Race proven off-road suspension. This system will give you up to 18″ of travel with a massive 1.5″ lower mono balls and 1″ uppers; just like the Trophy Trucks. The  lower pivots are not urethane, or Delrin they are massive 1″ mono balls. This kit is high end so if you are looking for the best off-road system for your A-Arm Ranger you have found it.

    This is the ultimate in high ...

  • Camburg Ford Ranger XLT 2wd 98-12 Race L/T Kit

    $5,500.00$9,310.00 CAM-110016
    Quick Overview

    This kit is high end so if you are looking for the best off-road system for your A-Arm Ranger you have found it. This system will give you up to 18″ of travel with a massive 1.5″ lower mono balls and 1″ uppers; just like the Trophy Trucks.

    This kit is high end so ...

  • Categories : Suspension

    Ford Ranger 2WD ’89-97 Heim Radius Arm Kit

    $1,000.00 CAM-110061
    Quick Overview
    • Radius Arms
    • Radius Arm Brackets
    • Tranny X-member
    • FK JM-16T 1-1/4″ Heim Joints
    • Stainless Steel Mis-alignment Spacers
    • Grade 9 Hardware
    Radius Arms Radius Arm Brackets Tranny X-member FK JM-16T ...

  • Camburg Ford Ranger 2WD/4WD ’93-12 3-link Kit

    $3,595.00 See Below_
    Quick Overview

    This is the most complete rear link kit out there today for the Ford Ranger. We offer two different kits, one for the older i-beam trucks and the other for the newer a-arm trucks. Geometry and mounting locations are designed for the extra-cab models. If you have a single cab ranger we can sell the kit minus the driveshaft carrier bearing strut frame as it’s not needed. This kit is not only heavily race proven but is also championship winning. This is the same kit we raced on for years in our Camburg Ranger Edge 7200 unlimited truck.

    This is the most complete rear ...

  • Categories : Suspension, Steering

    Camburg Ford Ranger 2wd/4wd 98-12 Heim Steering Kit

    $399.00 CAM-130003
    Quick Overview

    The stock inner joint on the 1998-2013 Rangers is known for failing under off-road conditions, so we came up with a solution for this problem. This billet CNC machined 17-4 H1150 stainless steel clevis with a 17-4 H1150 stainless steering rod incorporates a 3/4″ FK JMX rod end with a pair of stainless spacers. This steering upgrade is an awesome upgrade for these Rangers if you drive your truck off-road. This is also the same clevis used in our Long Travel coil-over off-road system.

    The stock inner joint on the ...

  • Camburg Ford Ranger XLT 98-12 5.5 CRS Coil Springs

    $250.00 CAM-110041
    Quick Overview

    These CRS Race springs are designed for optimum performance on and off-road. With our all new spring design we are able to have a plush ride with the ability to handle extreme off-road terrain. This  allows for more wheel travel through the use of high quality materials and manufacturing process. Finished with heat treated, shot penned (stress relived) and a high quality powder coated finish for corrosion resistance. These springs are the highest quality available today for the coil sprung 98+ Rangers.

    These are replacement springs for the Camburg 5.5 kit, they will not work on a stock truck.

    These CRS Race springs are designed ...

  • Categories : Suspension, Shackles

    Camburg Chevy / GMC / 1500 Silverado 99-17 MIG Shackles

    $160.00 CAM-120003
    Quick Overview

    Our extended shackle is designed around using Deaver leaf springs. These are longer length  than the stock shackles and allow for maximum wheel travel. The stock shackles are too short and limit droop. These are 1″ longer on the Chevy Silverado. Since the shackles are longer, they will lower the ride height compared to the stock shackles.

    Our extended shackle is designed around ...

  • Camburg Toyota Land Cruiser 08-17 FOX Factory 2.5 Kit R/R W/DSC

    Quick Overview

    Looking to add some race proven performance to your Toyota Land Cruiser? We have the answer. Utilizing FOX 2.5 Factory Series R/R Coilovers, valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. These Factory Series shocks feature a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, a 7/8″ hard chrome plated heat treated alloy steel shaft and an external reservoir design to separate shock oil from the high-pressure nitrogen.

    Looking to add some race proven ...

  • Camburg Toyota Land Cruiser 08-17 FOX Factory 2.5 Kit R/R

    Quick Overview

    Looking to add some race proven performance to your Toyota Land Cruiser? We have the answer. Utilizing FOX 2.5 Factory Series R/R Coilovers, valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. These Factory Series shocks feature a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, a 7/8″ hard chrome plated heat treated alloy steel shaft and an external reservoir design to separate shock oil from the high-pressure nitrogen.

    Looking to add some race proven ...

  • Camburg Toyota Tacoma Pre/4wd 05-17 KINETIK Series 2.5 FOX DSC Kit

    $4,485.00
    Quick Overview
    • Camburg KINETIK Series Billet Upper Arms
    • FOX 2.5 Factory Remote Res. Front Coilovers with DSC Adjusters
    • FOX 2.5 Factory Piggyback Rear Shocks with DSC Adjusters
    Camburg KINETIK Series Billet Upper Arms ...

  • Camburg Toyota Tacoma Pre/4wd 05-17 FOX Factory 2.5 Kit R/R

    $2,550.00 CAM-310058
    Quick Overview

    Looking to add some race proven performance to your Toyota Tacoma? We have the answer. Utilizing FOX 2.5 Factory Series R/R Coilovers, valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. These Factory Series shocks feature a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, a 7/8″ hard chrome plated heat treated alloy steel shaft and an external reservoir design to separate shock oil from the high-pressure nitrogen.

    Looking to add some race proven ...

  • Camburg Toyota Tacoma Pre/4wd 05-17 FOX Performance 2.5 Kit IFP

    $2,250.00 CAM-310085
    Quick Overview

    FOX 2.5 Factory Series IFP Coilovers are valved specifically for your application, we are able to gain 0-2.5 inches of lift and increase wheel travel as well. In addition, by replacing the stock ball-joint with a uni-ball bearing, we can increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. In the rear we go with a pair of FOX’s 2.0 Performance Series shocks to provide a firmer ride and better offroad performance.

    FOX 2.5 Factory Series IFP Coilovers ...

  • Camburg Toyota Tacoma Pre/4wd 05-15 Bilstein 6112 Performance Kit

    $1,519.00$1,619.00 See Below
    Quick Overview

    With Bilstein’s NEW 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their Tacoma, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains.

     

    • Adjustable shocks for 1-2.5″ of lift
    • Increased wheel travel
    • Corrected suspension geometry
    • 100% Bolt On

     

    With Bilstein's NEW 6112 line of ...

  • Camburg Toyota Tacoma Pre/4wd 16-17 Bilstein 6112 Performance Kit

    $1,519.00$1,619.00 See Below
    Quick Overview

    With Bilstein’s NEW 6112 line of adjustable shocks we’ve put together a great suspension kit for that customer looking to lift the front of their Tacoma, improve the ride quality both on and off-road all while staying within a price point that maximizes your gains.

     

    • Adjustable shocks for 1-2.5″ of lift
    • Increased wheel travel
    • Corrected suspension geometry
    • 100% Bolt On

     

    With Bilstein's NEW 6112 line of ...

  • saleCamburg Toyota Tacoma Pre/4wd 05-15 Bilstein 5100 Entry Level Kit

    $1,139.00$1,239.00 $1,080.00$1,180.00 CAM-310047
    Quick Overview

    If you’re looking to level out your Tacoma without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our ball-joint upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control.

    If you're looking to level out ...

  • saleCamburg Toyota Tacoma Pre/4wd 16-17 Bilstein 5100 Entry Level Kit

    $1,139.00$1,239.00 $1,080.00$1,180.00 CAM-310108
    Quick Overview

    If you’re looking to level out your Tacoma without breaking the bank, our Bilstein kit is a great choice. We use Bilstein’s 5100 Series adjustable front shocks in combination with our ball-joint upper arms. The Bilstein’s give you the ability to raise the front end at a few different levels and are valved/setup for the increased ride height for better handling and control.

    If you're looking to level out ...

Showing 1–64 of 274 Result

Top