Showing 129–156 of 156 Result

  • KMC XD798 ADDICT MATTE BLACK

    $175.00$277.00
    Quick Overview

    ADDICT Wheels by XD Series®. XD Series wheels are legends in off-roading. Their style and performance have made them favorites for off-road racers, rock crawlers and mudders alike. The designs are race-proven and feature an unmatched combination of light weight and durability.

    Construction: Cast Aluminum
    Available Diameters: 16″, 17″, 18″, 20″
    ADDICT Wheels by XD Series®. XD ...

  • KMC XD798 ADDICT MATTE BLACK MACHINED

    $175.00$300.00
    Quick Overview

    ADDICT Wheels by XD Series®. XD Series wheels are legends in off-roading. Their style and performance have made them favorites for off-road racers, rock crawlers and mudders alike. The designs are race-proven and feature an unmatched combination of light weight and durability.

    Construction: Cast Aluminum
    Available Diameters: 16″, 17″, 18″, 20″
    ADDICT Wheels by XD Series®. XD ...

  • MAXTRAX MKII

    $299.99 MTX02
    Quick Overview

    Perfect for maintaining an inconspicuous profile, black MAXTRAX are nearly invisible when mounted to your vehicle’s roof rack. This is the choice of colour for those in stealth mode. Just make sure to use your included leashes when they’re buried in the mud at night.

    The SAFE, SIMPLE, QUICK and EASY vehicle recovery device. The carton includes 2 MAXTRAX and 2 orange telltale leashes (so you can find your MAXTRAX when they’re buried).

    Perfect for maintaining an inconspicuous profile, ...

  • MAXTRAX Mounting Pin Set

    $29.99 MTXMPS
    Quick Overview

    High-quality black nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack or bars. They have provisions for a small (TSA-style) padlock to keep honest people honest.

    High-quality black nylon and stainless steel ...

  • MAXTRAX Fixing & Linking Kit

    $24.99 MTXFLK
    Quick Overview

    For linking MAXTRAX together to make a continuous track or pegging MAXTRAX to a slippery surface to provide maximum traction.

    For linking MAXTRAX together to make ...

  • MAXTRAX Rear Wheel Harness

    $94.99 MTXRWH
    Quick Overview

    The quickest way to attach MAXTRAX to your vehicle that’s equipped with a rear mounted spare tire. Perfect for the Jeep Wrangler and other vehicles that come from the factory with a tire on the back door.

    The quickest way to attach MAXTRAX ...

  • MAXTRAX Telltale Leashes

    $7.99 MTXFL
    Quick Overview

    MAXTRAX Telltale Leashes make it a breeze to find and recover your MAXTRAX when they’re buried in the ground.

    Please note that MAXTRAX come with leashes, purchase these if you’ve lost yours or need an extra pair.

    MAXTRAX Telltale Leashes make it a ...

  • Ford Ranger 4WD ’90-97 4.0 Prerunner Kit

    $3,575.00 CAM-110063
    Quick Overview
    • 4″ Extended TTB housings (must send in cores)
    • Heim Radius Arm Kit w/ Tranny X-member
    • 5.5″ lift Coil Springs
    • Bilstein 5100 Front Shocks
    • Stainless Steel Extended Front brake Lines
    • 8″ Limit Straps
    4" Extended TTB housings (must send ...

  • Ford F-150 2WD ’87-96 Heim Radius Arm Kit

    $800.00 CAM-110037
    Quick Overview
    • Radius Arms
    • Radius Arm Brackets
    • FK JM-16T 1-1/4″ Heim Joints
    • Stainless Steel Mis-alignment Spacers
    • Grade 9 Hardware
    Radius Arms Radius Arm Brackets FK ...

  • Ford Ranger 4WD ’90-97 4.0 Extended Race TTB Housings

    $2,400.00 CAM-110068
    Quick Overview

    Extended 4″ per side, modified to correct camber, uniball pivots installed, diff fully trussed and hardfaced front/back/top/bottom.

    Must send in stock TTB housings to modify prior.

    Extended 4" per side, modified to ...

  • Categories : Suspension

    Ford Ranger 4wd ’90-97 Heim Radius Arm Kit

    $1,100.00 CAM-110069
    Quick Overview
    • Radius Arms
    • Radius Arm Brackets
    • Tranny X-member
    • FK JM-16T 1-1/4″ Heim Joints
    • Stainless Steel Mis-alignment Spacers
    • Grade 9 Hardware
    Radius Arms Radius Arm Brackets Tranny X-member FK JM-16T ...

  • Ford Ranger 4wd 90-97 Modified TTB Housings

    $500.00 CAM-110066
    Quick Overview

    Rather than using cheap drop down brackets to correct camber geometry with modify your existing TTB housings. This way we don’t lose ground clearance, use a bracket that can stress the frame and create stress fractures and we keep the stock pivot points so we’re not introducing more bumpsteer in the steering geometry.

    • Modified TTB Housings Only
    Rather than using cheap drop down ...

  • Categories : Suspension

    Ford Ranger 4WD ’90-97 4.0 Long Travel Kit

    $4,575.00$6,735.00 CAM-110064
    Quick Overview
    • 4″ Extended Race TTB housings (must send in cores to modify)
    • Heim Radius Arm Kit w/ Tranny X-member
    • Coilover Engine Cage
    • Stainless Steel Extended Front brake Lines
    • 10″ Limit Straps

    Requires longer axle shafts available through CTM Racing or Currie Enterprises.

    4" Extended Race TTB housings (must ...

  • Ford Ranger 4WD ’90-97 5.5 Performance Kit

    $2,200.00 CAM-110062
    Quick Overview
    • Modified TTB Housings (must send in cores to modify)
    • Heim Radius Arm Kit w/ Tranny X-member
    • 5.5″ lift Coil Springs
    • Bilstein 5100 Front Shocks
    • Stainless Steel Extended Front brake Lines
    Modified TTB Housings (must send in ...

  • Ford Ranger 2WD/4WD ’89-97 Coilover Engine Cage

    $849.00 CAM-110060
    Quick Overview

    Our coilover engine cage is built from 1.5″ thick .188w 4130 chromoly tubing and welds onto the frame in three locations for maximum strength. It has a x-brace that bolts in to eliminate flexing.

    We designed this for our 4.5″ wider 2wd i-beams and 4″ wider 4wd TTB housings. This will not work with stock width suspension. Designed for a 2.5 x 14″ Sway-Away coilovers or 2.5 x 12″ FOX/King coilovers. Comes raw, un-powdercoated. Some models require battery being relocated and the stock airbox system removed.

    Our coilover engine cage is built ...

  • Ford Ranger 2WD/4WD ’89-97 Stainless Extended Front Brake Lines

    $100.00 See Below_
    Quick Overview

    These are the same brake lines we use in our performance and long-travel kits. They are extended in length, stainless steel braided and kevlar reinforced with an extra plastic layer for added protection. They come with everything you need and mount to the the factory calipers only. Some ’95-97 Rangers require the older ’89-94 versions if they do not have 4 wheel ABS. You can tell if the truck doesn’t have 4 wheel ABS if the driver side brake line at the frame has a bulkhead with two hard lines coming into it. If their is no bulkhead and just a single line, then the truck has 4 wheel ABS.

    • Stainless Steel Extended Front Brake Lines
    These are the same brake lines ...

  • Ford Bronco 4wd ’92-96 4-Link Kit

    $3,000.00 CAM-120014
    Quick Overview

    Our 4-link kit for Ford Bronco takes the rear suspension to the next level. This is designed for heavily modified prerunners and race trucks only. This kit is designed specific for the unique geometry the Bronco requires since it has a short double carden rear driveshaft. The upper and lower mounts bolt to the frame using existing holes to properly position them so their is no guess work where they go. This kit will yield 20-24″ of travel and pushes the rear wheelbase back 3″. The lower links are designed to use a 2.5-3″ coilover and 2.5-4″ bypass shock.

    Our 4-link kit for Ford Bronco ...

  • Ford Bronco 4wd ’86-96 Coilover Engine Cage Kit

    $950.00 CAM-110100
    Quick Overview

    This engine cage is designed to use a short body 14″ travel 2.5″ dual-rate coilover available from Bilstein or Sway-Away. The shock dimensions are 35-36″ extended and 21-22.5″ compressed.

    This engine cage is designed to ...

  • Ford Bronco/F-150 4wd ’86-96 4.0 Extended Race TTB Housings

    $2,400.00 CAM-110030
    Quick Overview

    Extended 4″ per side, modified to correct camber, uniball pivots installed, diff fully tussed and hardfaced front/back/top/bottom.

    Must send in stock TTB housings to modify prior.

    Extended 4" per side, modified to ...

  • Ford Bronco/F-150 4wd ’86-96 Heim Radius Arm Kit

    $900.00 CAM-110031
    Quick Overview

    One of the main suspension components on 4wd Bronco’s and F-150’s to upgrade is the radius arms. The stock versions are too short, stamped from sheet metal and pivot on a rubber bushing. Our radius arms are considerably longer in length to allow for more wheel travel and an improved camber curve. We also build more caster into the arm for better straight line stability and cornering precision. We use a Made in the USA FK 1-1/4″ heim joint with our new mounting brackets. This eliminates flex and also allows for more wheel travel. We build these using thick 3/8″ plate top and bottom and 1.75″ 4130 chromoly tubing that is boxed in for maximum strength. Many competitors use smaller, thinner and cheaper materials for a cheaper, lighter duty part. These were designed and built to be raced on and have been over the last 15+ years.

    One of the main suspension components ...

  • Ford Bronco/F-150 4wd ’86-96 4.0 Prerunner Kit

    $3,300.00 CAM-110026
    Quick Overview
    • 4″ Extended TTB housings
    • Heim Radius Arm Kit
    • 4″ lift Coil Springs
    • Bilstein 5100 Front Shocks (factory dual shock additional $200)
    • Stainless Steel Extended Front Brake Lines
    • Alignment Cam Kit
    • 8″ Limit Straps
    4" Extended TTB housings Heim Radius ...

  • Ford Bronco/F-150 4wd ’86-96 Modified TTB Housings

    $500.00 CAM-110028
    Quick Overview

    Rather than using cheap drop down brackets to correct camber geometry with modify your existing TTB housings. This way we don’t lose ground clearance, use a bracket that can stress the frame and create stress fractures and we keep the stock pivot points so we’re not introducing more bumpsteer in the steering geometry.

    • Modified TTB Housings Only
    Rather than using cheap drop down ...

  • Ford Bronco/F-150 4wd ’86-96 4.0 Performance Kit

    $2,050.00 CAM-110025
    Quick Overview
    • Modified TTB Housings (must send in TTB housings to be modified | no cores available)
    • Heim Radius Arm Kit
    • 4″ lift Coil Springs
    • Bilstein 5100 Front Shocks (factory dual shock additional $200)
    • Stainless Steel Extended Front brake Lines
    • Alignment Cam Kit

     

    Modified TTB Housings (must send in ...

  • Camburg 9/16-18 8-Lug Spline Wheel Lug Kit (Black)

    $50.00 CAM-010038
    Quick Overview

    Camburg 9/16-18 8-Lug Spline Wheel Lug Kit (Black)

    Ford Vans

    Camburg 9/16-18 8-Lug Spline Wheel Lug ...

  • Camburg M14 x 2.00 8-Lug Spline Wheel Lug Kit (Black)

    $50.00 CAM-010042
    Quick Overview

    Camburg M14 x 2.00 8-Lug Spline Wheel Lug Kit (Black)

    These lugs are made for aftermarket wheels and come in a complete set with a spline key, to prevent theft.

    99-02 F250/350

    Camburg M14 x 2.00 8-Lug Spline ...

  • Camburg 1/2-20 5-Lug Spline Wheel Lug Kit (Black)

    $45.00 CAM-010045
    Quick Overview

    Camburg 1/2-20 5-Lug Spline Wheel Lug Kit (Black)

    These lugs are made for aftermarket wheels and come in a complete set with a spline key, to prevent theft.

    83-12

    RANGER

    83-96

    F150/BRONCO

    Camburg 1/2-20 5-Lug Spline Wheel Lug ...

  • Camburg M14 x 1.50 8-Lug Spline Wheel Lug Kit (Black)

    $50.00 CAM-010040
    Quick Overview

    Camburg M14 x 1.50 8-Lug Spline Wheel Lug Kit (Black)

    These lugs are made for aftermarket wheels and come in a complete set with a spline key, to prevent theft.

    03-16

    F250/350

    01-16

    HD2500

    Camburg M14 x 1.50 8-Lug Spline ...

Showing 129–156 of 156 Result

Top