FOX now offers their standard Factory 2.5 remote reservoir version and for the ultimate combination their new DSC version. Both shocks have a 2.5″ diameter shock body for added oil capacity for aggressive use both on and offroad. Based on their race shocks, they are fully rebuild-able and revalve-able for optional tuning and maintenance.
Our Camburg limit straps are made in the USA and quad wrapped for the ultimate strength from military grade materials. The mounting tabs are 4130 chromoly and plated black for corrosion resistance. These won’t stretch like cheaper versions will that are made overseas.
We now have available the same polyurethane grease we supply with our upper arms in a grease tube to load into a grease gun and charge through zerk fittings. This is the BEST grease to use for any polyurethane bushings from upper arms to leaf springs. It contains versatile water-proof, non-melting Teflon and is formulated to seal out water and to lubricate under the most adverse conditions. It’s superior adhesive and extreme pressure qualities, combined with it’s urethane compatibility makes it the only one to use.
Complete hardware kit for Camburg 1.25″ uniball upper control arms. If you have older arms that use a 1.00″ uniball and hex head bolt, make a note of that in the notes section as it will be a different kit.
With heims and uniballs you want to make sure you use the right lube and not a grease or oil that attracts dirt. Tri-flow is a teflon (PTFE) based lube that goes on wet and drys to a film to coat and seal the surfaces. You only need to use 3-4 drops per uniball or heim.
Our UCA bushing and sleeve kit includes replacement bushings and pivot sleeves for all Camburg bushing upper arms. We also include new zerk fittings along with bushing grease packets. Here’s an easy way to freshen up your upper arms.
An easy way to mount a limit strap to the frame/chassis is using this clevis. It gives you the ability to adjust the strap length so initial setup is not as critical and you can re-adjust if the strap stretches over time or if you miscalculated the location slightly. You will need to make the mount this fits into from a piece of tubing.
Camburg Engineering is the leader in off-road suspension systems and is at the forefront in technology and design. Our over the counter parts are being race tested constantly and have won numerous championships, so if you are looking for the most proven long travel or performance suspension systems Camburg is your #1 choice.