Camburg Toyota Tacoma Pre/4wd 05-15 Long Travel Kit Only

Camburg Toyota Tacoma Pre/4wd 2016 Long Travel Kit Only

Sku: CAM-310101

Quick Overview

In this high end Camburg Long Travel kit you will find nothing but the very best in A-Arm performance. Starting with our lower arm, uni-balls in the lower frame pivots, uni-ball lower ball joint replacement, and a stout boxed race arm. The upper arm pivots on urethane bushings with zerk fitting and 1.25″ uniballs replace the stock ball joints. We adapt the uniball to the spindle with heat treated stainless steel adapters.

Clear

In this high end Camburg Long Travel kit you will find nothing but the very best in A-Arm performance. Starting with our lower arm, uni-balls in the lower frame pivots, uni-ball lower ball joint replacement, and a stout boxed race arm. The upper arm pivots on urethane bushings with zerk fitting and 1.25″ uniballs replace the stock ball joints. We adapt the uniball to the spindle with heat treated stainless steel adapters. Utilizing Camburg SPEC 8″ travel 2.5″ reservoir coilovers by FOX or King there is no need to cut the stock coil-over mounts. The shock design has an external top cap so the shock has a shorter overall extend length then all other off-road race shocks. The steering upgrade includes heat treated stainless steel tie-rod and inner clevis which utilizes a FK 3/4″ heim joint. This system will yield up to 15″ travel on a 2×4 and 14″ on a 4×4. This system can also be upgraded with our dual shock mount and a 2.5″ 3 tube by-pass shock can be added to the system. So to sum it up this upper and lower uni-ball Long Travel System is for the ultimate in performance so if you are into trail running or desert racing or just exploring Moab you have found the ultimate in performance!

  • Upper Uni-ball A-arms
  • Lower Uni-ball A-arms
  • Lower Uni-ball Spindle Adapter
  • Brake Lines
  • Limit Straps
  • Steering Extensions
  • Coilover Mounts
  • Hardware
  • Prerunner models are able to run a coilover, bypass shock and air bump stop
  • 4wd models can run a coilover and air bump stop or coilover and bypass shock, not all 3 like the Prerunner model
  • Fiberglass front fenders are required
  • Specific L/T kit coilovers at minimum are required to install this kit and L/T axles on 4wd trucks

Shock Specs: CLICK HERE FOR SPEC SHEET

  • 2.5 x 8″ remote coilover
  • 16″ x 500-600 lb coils
  • 23.9″ extended | 16.4″ collapsed
  • Tapered/Raised lower spring seat
  • 2″ Longer lower rod end
  • 1.25″ width shock spacers
  • 90 degree res. fitting on shock
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
2.5-4 in (front) 14-15 in +3.5 in per side 16-17 in 4.75 in 33-35 in 2wd: $750 | 4wd: $1000 | +$85 Align
MakeModelYear
ToyotaTacoma (2wd)2016-2017
ToyotaTacoma (4wd)2016-2017
Top