Camburg Ranger 2wd/4wd 93-12 Bedcage

Camburg Ranger 2wd/4wd 93-12 Bedcage

Sku: CAM-120013

Quick Overview

Looking for maximum wheel travel with leaf springs? Our rear bedcage for the Ford Ranger bolts onto the frame or can be welded on if preferred and is built from 1.75″ x .120w DOM tubing and MIG welded. It ties into the frame in 3 locations per side for optimum strength and to minimize frame flex under hard off-road use.

Out of stock

Looking for maximum wheel travel with leaf springs? Our rear bedcage for the Ford Ranger bolts onto the frame or can be welded on if preferred and is built from 1.75″ x .120w DOM tubing and MIG welded. It ties into the frame in 3 locations per side for optimum strength and to minimize frame flex under hard off-road use. It’s setup to use a 16″ travel Sway-Away shock or 14″ travel FOX or King. It has an integrated spare tire spinner and misc tabs for dust lights, antennas, etc. It comes powdercoated gray or can be custom ordered raw or black. This was designed around Deaver long-travel leaf springs and our Camburg shackles for 16-18″ of wheel travel.

  • Bedcage
  • Grade 8 hardware
  • Tire spinner hold-down
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
MakeModelYear
FordRanger (2wd)1993-2012
FordRanger (4wd)1993-2012
Top