Camburg 3.25 TT Rear Hub Kit [6 on 6.5 x 40 spline]

Camburg 3.25 TT Rear Hub Kit [6 on 6.5 x 40 spline]

Sku: CAM-020012

Quick Overview

Here’s our new Camburg 3.25 TT rear hubs available in the 6 on 6.5″ TT bolt pattern. These are the same hubs used in our KINETIK 7200/6100/TT race trucks. We CNC machine the hub in-house from 7075-T6 aluminum, then bead blast and anodize them matte black. Our wheel studs are also machined in-house from 4340 chromoly, then heated-treated and stress relieved. They have 5/8-18 threads with an 11/16 shoulder. We use Timken bearings and races along with National seals with a stainless retainer ring. Our 40 spline driveplates are machined from 4340 chromoly, heat-treated, stress relieved and plated for corrosion resistance. The 4.25″ hub-centric center caps round out the package with all the necessary hardware, o-rings, etc and bearing spacers.

Quantity

$3,195.00

Here’s our new Camburg 3.25 TT rear hubs available in the 6 on 6.5″ TT bolt pattern. These are the same hubs used in our KINETIK 7200/6100/TT race trucks. We CNC machine the hub in-house from 7075-T6 aluminum, then bead blast and anodize them matte black. Our wheel studs are also machined in-house from 4340 chromoly, then heated-treated and stress relieved. They have 5/8-18 threads with an 11/16 shoulder. We use Timken bearings and races along with National seals with a stainless retainer ring. Our 40 spline driveplates are machined from 4340 chromoly, heat-treated, stress relieved and plated for corrosion resistance. The 4.25″ hub-centric center caps round out the package with all the necessary hardware, o-rings, etc and bearing spacers.

To complete this setup you’ll need the weld-in snouts and our custom axle nut wrench.

  • Hubs
  • Drive Plates
  • Center Caps
  • National Seals
  • Timkin Bearings
  • Bearing Preload Spacers
  • Rotor Adaptors (12 on 9.19″ or 12 on 8.75″)
  • 5/8-18 Wheel Studs
  • O-rings, Hardware, Etc
Lift Wheel Travel Track Width Wheel Size Max Backspacing Tire Size Install Labor Alignment Specs
MakeModelYear
Top